Disassembly Procedure Flowchard

The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the system board, you must first remove the keyboard, then disassemble the inside assembly frames in that order.

Main unit disassembly flow chart

Start

1

Battery

1

r

1

1

f

r

r

Audio

VGA

I/O

Main

LCM

Board

Board

Board

Board

Module

LCM module disassembly flow chart

Removing the Battery Pack

  1. Release the battery lock.
  2. Slide the battery latch then remove the battery.

NOTE: Battery has been highlighted with the yellow circle as above image shows. Please detach the battery and follow local regulations for disposal.

Removing the HDD and RAM

1. Remove two screws on the HDD cover and remove HDD.

Travelmate 8571 Disassembly

Type

Number

M2*5(4.5D*0.8T)

2

2. Remove the screw on RAM cover and remove

RAM.

RAM.

Type

Number

M2*5(4.5D*0.8T)

NOTE: RTC battery has been highlighted with the yellow circle as above image shows. Please detach the RTC battery and follow local regulations for disposal.

  1. Remove the wireless card.
  2. Remove the wireless card.

Use the sleeve to remove the rubber and remove all of the screw on the back of BAP41

-

Type

Number

M2*5(4.5D*0.8T)

13(Red)

-

Type

Number

M2*5(4.5D*0.5T)

2(Yellow)

Remove Keyboard

1. Disconnect six latches on the keyboard.

How Disassemble Acer 8571

. j ! ~ a -- i ■ ■ > ; « ; ■ j - ■

<1 IV i ■ 1 o ' p p

111

■WHSST " ' IBIMBB

a '

St;

88H'*" 1 * 1 IHHHIHIfllBi^HIHH

■ w

1

'' ■ w > » « ' " 'v i

Remove FFC of main board and sub board

1. Remove screws and FFC on the upper case.

2. Remove Power board.

3. Remove the FFC and screw on the Wireless board.

Type

Number

M2*5(4.5D*0.8T)

1

5. Remove connector on the audio board and remove two screws on it.

6. Remove the cable on the back of audio board.

8. Remove the cable of LCD and Connector of Fan.

Remove Panel

1. Remove four screws on the button of panel and remove the panel.

Type

Number

M2*5(4.5D*0.8T)

1

3. Remove four sponges on the LCD and remove four screws under them.

Type

Number

M2*4(4.5D*0.5T)

4(Red)

Type

Number

M2*3(4.5D*0.8T)

2(Yellow)

4. Remove the bazel on the panel and remove four screws on it.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

Post a comment