Replacing the Bluetooth card

Tools you need to complete this task:

Non Marring Tool

Phillips #0 screwdriver

Phillips #0 screwdriver

Scribe or non-marring tool

Screws removed during this task:

Replacing Travelmate Bluetooth Module

To replace the Bluetooth card:

1 Complete the steps in "Preparing the notebook" on page 55.

2 Remove the memory bay cover by following the steps in "Adding or replacing memory modules" on page 57.

3 If the notebook has wireless networking built in, unplug the wireless antennas by following the steps in "Replacing the IEEE 802.11 wireless card" on page 67.

4 Remove the hard drive(s) by following the steps in "Replacing the primary hard drive" on page 64 and "Replacing the secondary hard drive" on page 73.

5 Remove the keyboard cover by following the steps in "Replacing the keyboard cover" on page 78.

6 Remove the keyboard by following the steps in "Replacing the keyboard" on page 80.

7 Remove the LCD assembly by following the steps in "Replacing the LCD assembly" on page 84.

8 Remove the palm rest by following the instructions in "Replacing the palm rest" on page 96.

9 Disconnect the cable from the Bluetooth card. Use a scribe or other non-marring tool to gently push the plug out of the connector.

Palm Bluetooth Card
Bluetooth card connector

10 Remove the old Bluetooth card from the notebook.

Acer Travelmate 6292 Bluetooth Remove

11 Insert the new Bluetooth card.

12 Connect the Bluetooth cable to the Bluetooth card.

13 Replace the palm rest by following the steps in "Replacing the palm rest" on page 96.

14 Replace the LCD assembly by following the steps in "Replacing the LCD assembly" on page 84.

15 Replace the keyboard by following the steps in "Replacing the keyboard" on page 80.

16 Replace the keyboard cover by following the steps in "Replacing the keyboard cover" on page 78.

17 Replace the hard drive(s) by following the steps in "Replacing the primary hard drive" on page 64 and "Replacing the secondary hard drive" on page 73.

18 If the notebook has wireless networking built in, reconnect the wireless antennas by following the steps in "Replacing the IEEE 802.11 wireless card" on page 67.

19 Replace the wireless bay cover by following the steps in "Replacing the IEEE 802.11 wireless card" on page 67.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • sauli
    How to install bluetooth module to acer 7730?
    9 years ago

Post a comment