Removing the WLAN Board Modules

1.

See

"Removing the Battery Pack" on page 62.

2.

See

"Removing the SD dummy card" on page 63.

3.

See

"Removing the PC and ExpressCard dummy cards" on page 63

4.

See

"Removing the Lower Cover" on page 64.

S.

Remove the tape holding the gray antenna.

6. Disconnect the antenna cables from the WLAN board.

Extensa 2300 Antenna

7. Move the antenna away from the WLAN board and remove the two screws (C) on the WLAN board to release the WLAN board.

Travelmate 240 Wlan

Step

Size (Quantity)

Color

Torque

1~2

M2 x L4 (2)

Silver

1.6 kgf-cm

  1. Detach the WLAN board from the WLAN socket.
  2. Detach the WLAN board from the WLAN socket.
Wlan 7720z

NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment