Removing the Speaker Module

  1. See "Removing the Upper Cover" on page 71.
  2. Remove the two securing screws from the left speaker.

3. Disconnect the Mic cable.

4. Remove the five securing screws.

Step

Size

Quantity

Screw Type

Speaker Module

M2*L6 (NL)

5

frm

  1. Remove the Speaker Modules as shown.
  2. Remove the Speaker Modules as shown.
  1. Remove the Upper Cover. See "Removing the Upper Cover" on page 71.
  2. Remove the Speaker Module. See "Removing the Speaker Module" on page 76.
  3. Remove the Finger Print Reader. See "Removing the Finger Print Reader" on page 75.
  4. Disconnect the TouchPad FFC from the TouchPad board.

Take note of any items that may remain on the upper cover, and remove them. To replace the TouchPad, the upper cover module must be replaced.

  1. See "Removing the Upper Cover" on page 71.
  2. Lift the locking lever and disconnect the FFC.

3. Remove the three securing screws.

Step

Size

Quantity

Screw Type

Launch Board

M2.5*L4 (NL)

3

5. Remove the Launch Board from the bracket.

  1. See "Removing the Upper Cover" on page 71.
  2. Disconnect the Bluetooth cable connecting the Bluetooth module.

3. Lift the Bluetooth module away from the base.

Acer Aspire 7530 Bluetooth Module
  1. See "Removing the Upper Cover" on page 71.
  2. Locate the modem module and disconnect the cable.
3. Remove the securing screw from the modem module.

Step

Size

Quantity

Screw Type

Modem Module

M2.5*L4 (NL)

1

  1. Lift the module from the mainboard.
  2. Lift the module from the mainboard.
  1. See "Removing the Upper Cover" on page 71.
  2. Disconnect the cable connecting the ExpressCard module.

3. Remove the three securing screws.

Step

Size

Quantity

Screw Type

ExpressCard Module

M2.5*L4 (NL)

3

  1. Lift the ExpressCard module away from the upper cover.
  2. Lift the ExpressCard module away from the upper cover.
  1. See "Removing the Upper Cover" on page 71.
  2. See "Removing the Modem Module" on page 82.
  3. Disconnect ExpressCard and Bluetooth cables attached to the mainboard.
The Inside Acer 7530 Travelmate

4. Remove the two securing screws on the mainboard.

Step

Size

Quantity

Screw Type

Mainboard

M2.5*L6.5 (NL)

2

m

5. Remove the mainboard from the lower base.

  1. Remove the Mainboard. See "Removing the Mainboard" on page 84.
  2. Loosen the three captive screws.
4. Lift the Fan module clear of the mainboard.
  1. Remove the Mainboard. See "Removing the Mainboard" on page 84.
  2. Take note of the indicators on the socket cam screw. Using a flat screwdriver, turn the CPU socket screw counter-clockwise until it indicates unlocked.

LCD Module Disassembly Process LCD Module Disassembly Flowchart

Screw List

Step

Screw

Quantity

Part No.

LCD Bezel

M2.5*L5 (NL)

6

LCD Panel

M2.5*L5 (NL)

9

LCD Brackets

M2*L3 (NL)

8

Camera Bracket

M2*L3 (NL)

2

  1. Remove the LCD Module. See "Removing the LCD Module" on page 68.
  2. Remove the six rubber covers and screws.

Step

Size

Quantity

Screw Type

LCD Bezel

M2.5*L5 (NL)

6

m

3. Starting from the inside edges, pry the inside of the bezel upwards from the panel. Continue moving left until the bezel is removed. If necessary, use a plastic pry to release the corners of the bezel.

  1. Remove the LCD Bezel. See "Removing the LCD Bezel" on page 89.
  2. Disconnect the left and right Inverter board cables as shown.
3. Lift the Inverter board clear of the LCD Module.
  1. Remove the LCD Bezel. See "Removing the LCD Bezel" on page 89.
  2. Disconnect the Camera Module cable as shown.

IMPORTANT:Be careful when using a sharp tool to remove the cable or camera module. The surface of the LCD panel can be easily scratched.

3. Remove the module from its securing pins and lift away from the bracket.

  1. Remove the LCD Bezel. See "Removing the LCD Bezel" on page 89.
  2. Remove the nine securing screws from the LCD Panel.

IMPORTANT:The leftside screw holds the ground connector in place. Ensure that the ground is replaced during reassembly.

Step

Size

Quantity

Screw Type

LCD Panel

M2.5*L5 (NL)

9

*

  1. Lift the LCD Panel clear of the LCD Module.
  2. Lift the LCD Panel clear of the LCD Module.
  1. Remove the LCD Panel. See "Removing the LCD Panel" on page 93.
  2. Turn the LCD panel over to expose the rear. Remove the mylar strips securing the FPC cable.

3. Disconnect the cable from the panel and remove.

4. Remove the eight securing screws (four on each side) from the LCD Panel brackets.

Step

Size

Quantity

Screw Type

LCD Brackets

M2*L3 (NL)

8

*

5. Remove the two securing screws from the camera bracket (top of LCD Panel).

Step

Size

Quantity

Screw Type

Camera Bracket

M2*L3 (NL)

2

  1. Remove the camera and LCD brackets by pulling away from the LCD Panel as shown.
  2. Remove the camera and LCD brackets by pulling away from the LCD Panel as shown.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • tiffany
    How to remove a speaker frm its connection?
    9 years ago

Post a comment