Removing the ODD Board Module

  1. See "Removing the Battery Pack" on page 62.
  2. See "Removing the SD dummy card" on page 63.
  3. See "Removing the PC and ExpressCard dummy cards" on page 63.
  4. See "Removing the Lower Cover" on page 64.
  5. See "Removing the Secondary HDD Cover" on page 65.
  6. See "Removing the Secondary HDD Bracket and Connector" on page 66.
  7. See "Removing the DIMM" on page 68.
  8. See "Removing the WLAN Board Modules" on page 68.
  9. See "Removing the Hard Disk Drive Module" on page 69.
  10. See "Removing the Optical Drive Module" on page 70.
  11. See "Removing the Modem Board" on page 73.
  12. See "Removing the Heatsink Fan Module" on page 74.
  13. See "Removing the CPU and VGA Heatsink Module" on page 75.
  14. See "Removing the CPU" on page 76.
  15. See "Removing the VGA board (for Discrete model only)" on page 77.
  16. See "Removing the Middle Cover and the Power Board" on page 78.
  17. See "Removing the Keyboard" on page 79.
  18. See "Removing the LCD Module" on page 81.
  19. See "Separating the Upper Case from the Lower Case" on page 83.
  20. See "Removing the Main Board" on page 89.
  21. Detach the ODD board module from the main board.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment