External Cdrom Drive Check

Do the following to isolate the problem to a controller, drive, or CD-ROM. Make sure that the CD-ROM does not have any label attached to it. The label can cause damage to the drive or can cause the drive to fail.

Do the following to select the test device:

  1. Boot from the diagnostics diskette and start the diagnostics program.
  2. See if CD-ROM Test is passed when the program runs to CD-ROM Test.
  3. Follow the instructions in the message window.

If an error occurs, reconnect the connector on the System board. If the error still remains:

  1. Reconnect the external diskette drive/CD-ROM module.
  2. Replace the external diskette drive/CD-ROM module.
  3. Replace the main board.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


  • abdul
    What will cause damage to an external drive but not a CDROM?
    9 years ago

Post a comment