Separating the Upper Case from the Lower Case

  1. See "Removing the Battery Pack" on page 56.
  2. See "Removing the SD dummy card" on page 57.
  3. See "Removing the PC and ExpressCard dummy cards" on page 58.
  4. See "Removing the Lower Cover" on page 60.
  5. See "Removing the DIMM" on page 62.
  6. See "Removing the Hard Disk Drive Module" on page 63.
  7. See "Removing the Expansion Slots Cover" on page 65.
  8. See "Removing the 3G Board Module" on page 66.
  9. See "Removing the WLAN Board Module" on page 68.
  10. See "Removing the Modem Board" on page 69.
  11. See "Removing the Middle Cover" on page 72.
  12. See "Removing the Keyboard" on page 73.
  13. See "Removing the Optical Drive Module" on page 59.
  14. See "Removing the Heatsink Fan Module" on page 74.
  15. See "Removing the CPU and VGA Heatsink Module" on page 75.
  16. See "Removing the CPU" on page 76.
  17. See "Removing the VGA Board (Discrete Model only)" on page 77.
  18. See "Removing the LCD Module" on page 78.
  19. Disconnect the touchpad cable from the TPAD1 connector on the main board.
Cable Touchpad 5220Travelmate 6593 Mainboard

20. Disconnect the fingerprint cable from the FPCN1 connector on the main board.

Modem Board Acer Travel 620

23. Remove the nine screws (C) from the bottom panel.


Size (Quantity)




M2.5 x L6 (9)


3.0 kgf-cm

  1. Turn the unit over and gently remove the upper case from the lower case.
  2. Turn the unit over and gently remove the upper case from the lower case.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment