BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into your computer's BIOS (Basic Input/ Output System).

Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises.

To activate the BIOS Utility, press F2 during POST (when "Press <F2> to enter Setup" message is prompted on the bottom of screen).

Press F2 to enter setup. The default parameter of F12 Boot Menu is set to "disabled". If you want to change boot device without entering BIOS Setup Utility, please set the parameter to "enabled".

Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without entering BIOS SETUP Utility.

Information

Phoenix SecureCore(tm) Setup Utility

Securit

Information

Phoenix SecureCore(tm) Setup Utility

Securit

Boot

Exit

CPU Type:

Intel (R) Core (TM)2 Duo CPU T9400 @ 2.53 GHz

CPU Speed:

2.53 GHz

IDE0 Model Name:

XXXXXXXXXXX-(XX)

IDE0 Serial Number:

XXXXXXXX

ATAPI Model Name:

XXXXXXXXXXX-XXX XX-XXXX-(XX)

System BIOS Version:

VX.XX

VGA BIOS Version:

XX-XXX XXXXXX.XXX.XXX.XXX.XXXXXX

KBC Version:

XX.XX

Serial Number:

XXXXXXXXXXXXXXXXXXXXXXX

Asset Tag Number:

None

Product Name:

TravelMate 6593

Manufacturer Name:

Acer

UUID:

XXXxXxXX-xXxX-XXxx-xXXx-xXXxXXxXxxXX

Help ^»Select Item

Exit PU Select Menu

Enter

Help ^»Select Item

Exit PU Select Menu

Enter

Change Values Select ► Sub-Men

Setup Defaults nu nil Save and Exit

Boot

Exit

Navigating the BIOS Utility

There are six menu options: Information, Main, Security, Boot, and Exit. Follow these instructions:

  • To choose a menu, use the left and right arrow keys.
  • To choose an item, use the up and down arrow keys.
  • To change the value of a parameter, press F5 or F6.
  • A plus sign (+) indicates the item has sub-items. Press Enter to expand this item.
  • Press Esc while you are in any of the menu options to go to the Exit menu.
  • In any menu, you can load default settings by pressing F9. You can also press F10 to save any changes made and exit the BIOS Setup Utility.

NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a particular menu are shown on the bottom of the screen. Help for parameters are found in the Item Specific Help part of the screen. Read this carefully when making changes to parameter values. Please note that system information is subject to different models.

Was this article helpful?

+1 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • Orlagh
    How to go to bios setup in travelmate 6593?
    9 years ago
  • Herman
    How to set up webcam acer travelmate 6593?
    9 years ago

Post a comment