LCM Module Reassembly Procedure

Replacing the LCD Panel

1. Align the LCD brackets the four screw holes (two on each side) on the LCD Panel as shown.

2. Secure the LCD brackets to the LCD panel.
3. Insert the cable into the cable connector on the LCD Panel as shown.
4. Align the LCD Panel cable as shown and press down to engage the adhesive pads.

5. Place the WebCam Module in the mounting as shown.

6. Place the Inverter Board in the mounting and secure with the screw provided.
7. Place the LCD Panel in the mounting and secure the three panel connectors as shown.
Acer Module Panel Connector Settings

Secure the LCD Panel with the six screws provided.

Replacing the LCM Bezel

1. Locate the bezel correctly and press down the edges until there are no gaps between the bezel and the LCM Module,

2. Secure the six screws provided and replace the mylar (small red markers) and rubber screw caps (large red markers).

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook

Post a comment