Advanced

The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system.

PhoenixBIOS Setup Utility

Info Main Security

Boot Exit

Item Specific Help

Infrared Port: [Enabled]

Configure Infrared Port

using oprions:

[Disabled]

No configuration

[Enabled]

User configuration

[Auto]

BIOS or OS chooses

configuration

(OS Controlled)

Displayed when

controlled by OS

Help ^^QH Select Item Change Values

Setup Defaults

I Exit Select Menu ^^BBSm Select ► Sub - Menu ^^HwSave and Exit

The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Options

Infrared Port

Enables, disables or auto detects the Infrared port.

Auto/Enabled/Disabled

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

PhoenixBIOS Setup Utility

Info. Main Advanced

1 Security |

Boot Exit

Supervisor Password is:

Clear

Item Specific Help

User Password is:

Clear

Supervisor Password

[Enter]

controls accesses of the

setup utility.

Set User Passord

Password on Boot:

[Disabled]

BHelp IHH Select Item ^KgjgaChange Values ^^ Setup Defaults

Exit Select Menu ^g^gjselect ► Sub-Menu ^QQQ Save and Exit

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Supervisor Password Is

N/A

N/A

User Password Is

N/A

N/A

HDD Password Is

N/A

N/A

Set Supervisor Password

Press Enter to set the administrator password. When set, this password protects the BIOS Setup Utility from unauthorized access. [Set]: System password is set [Clear]: System password is not set

Length -- No more than 8 characters

Characters -- 0-9, A-Z (not case sensitive)

Set User Password

Parameter

Description

Option

Set HDD Password

When shown as [Locked], the hard drive password currently can not be changed or disabled.

To change or disable it, turn off the system and enter Setup immediately after turning it back on.

Press [Enter] to input change, or disable hard drive password.

Enter

Password on boot

Defines whether a password is required or not while the events defined in this group happened. The following suboptions are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Allows the user to specify whether or not a password is required to boot.

Disabled

Enabled

Set Supervisor/User Password

If password on boot is required, the password must be set otherwise it cannot be enabled. The formats of the password are as follows: Length No more than 8 characters

Characters 0-9,A-Z (not case sensitive)

While these fields are highlighted and press "Enter", a window similar to the following is shown:

Set SupervisorPassword Enter New Password [ ]

Confirm New Password [ ]

If there is an old password then setup will prompt with the following window instead and a current password will be required to be entered at first:

Set Supervisor Password

Enter current password

[

]

Enter New Password

[

]

Confirm New Password

[

]

User can now type password in field "Enter New Password", and re-enter password in field "Confirm New Password" for verification.

If the verification is OK:

The password setting is complete after user presses enter. Setup Notice

Changes have been saved. [ continue]

If the current password entered does not match the actual current password: Setup Warning Invalid password Re-enter Password [ continue]

If the new password and confirm new password strings do not match: Setup Warning Password do not match Re-enter Password

This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the distette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay and onboard LAN device.

PhoenixBIOS Setup Utility

Info. Main Advanced Security

Boot

Exit

Boot priority order:

4: IDE 0: ST9100824ASIDE S 6: PCI SCSI

Item Specific Help

Keys used to view or configure devices: Up and Down arrows select a device. <+> and <-> moves the device up or down. <f> and <r> specifies the device fixed or removable.

<x> exclude or include the device to boot. <Shift + 1> enables or disables a device. <1- 4 > Loads default boot sequence.

KHelp ^HHSelect Item ^^BS/FS Change Values ^^^TH Setup Defaults Exit Select Menu ^^Effllfl Select 4 Sub-Menu ^^«^Save and Exit

Parameter

Description

Boot priority order

Keys used to view or configure devices: Up and Down arrows select a device. <+> and <-> movew the device up or down. <f> and <r> specifies the device fixed or removable.

<x> exclude or include the device to boot. <Shift +1> enables or disables a device. <1-4> Loads default boot sequence.

PhoenixBIOS Setup Utility

Item Specific Help

Exit Dicarding Changes

Exit System Setup and save

Load Setup Defaults

your changes to CMOS.

Discard Changes

Save Changes

HHelp HHR Select Item ^H||F9change Values Setup Defaults

Exit ^^BQjSelect Menu ^^gQHselect 4 Sub-Menu ^^gQQSave and Exit

The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS

Exit Discarding Changes

Exit utility without saving Setup data to CMOS

Load Setup Default

Load default values for all SETUP items

Discard Changes

Load previous values from CMOS for all SETUP items

Save Changes

Save Setup Data to CMOS

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment