Replacing the LCM Module

1. Align the four screw holes on the LCM Module hinges with the corresponding screw holes on the chassis. Lower the LCM Module into position as shown. Ensure that the LCM cables are inserted through the aperture before proceeding (yellow marker).

2. Connect the LCM Module cable to the connector on the chassis as shown.

3. Secure the two screws at the rear of the computer as shown and the four screws to hold the LCM in place on the chassis.

Note: Ensure that the earth wire is reconnected during this step.

Note: Ensure that the earth wire is reconnected during this step.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment