Removing the G Board Module

  1. See "Removing the Battery Pack" on page 56.
  2. See "Removing the Expansion Slots Cover" on page 64.
  3. Disconnect the antenna cables from the 3G board.
Acer 8930 Wifi Wires Aux Main

NOTE: There are 2 antenna cables connected to the 3G board. The Green antenna cable is connected to MAIN connector and the Blue antenna cable is connected to AUX connector.

4. Remove the one screw (B) on the WLAN board to release the WLAN board.

Wlan Antenne Main Und Aux

Step

Size (Quantity)

Color

Torque

1

M2 x L4 (2)

Silver

1.6 kgf-cm

  1. Detach the 3G board from the connector.
  2. Detach the 3G board from the connector.
Acer Travelmate 5730

NOTE: When attaching the antenna back to the 3G board, make sure the cable are arranged properly.

Removing the WLAN Board Module i. 2. 3.

See "Removing the Battery Pack" on page 56.

See "Removing the Expansion Slots Cover" on page 64.

Disconnect the antenna cables from the WLAN board.

NOTE: There are 3 antenna cables connected to the WLAN board. The Black antenna cable is connected to connector 1, the White antenna cable is connected to connector 2 and the Grey antenna cable is connected to connector 3.

4. Remove the one screw (B) on the WLAN board to release the WLAN board.

Step

Size (Quantity)

Color

Torque

1

M2 x L4 (1)

Silver

1.6 kgf-cm

5. Detach the WLAN board from the WLAN socket.

NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment