Exit

The Exit screen contains parameters that help safeguard and protect your computer from unauthorized use. Information Main Advanced Security Boot Information Main Advanced Security Boot The table below describes the parameters in this screen. Exit System Setup and save your changes to CMOS. Exit utility without saving setup data to CMOS. Load default values for all SETUP item. Load previous values from CMOS for all SETUP items.

Acer Grid Vista dualdisplay compatible

NOTE This feature is only available on certain models. To enable the dual monitor feature of the notebook, first ensure that the second monitor is connected, then select Start, Control Panel, Display and click on Settings. Select the secondary monitor (2) icon in the display box and then click the check box Extend my windows desktop onto this monitor. Finally, click Apply to confirm the new settings and click OK to complete the process.

External Diskette Drive Check

Do the following to isolate the problem to a controller, driver, or diskette. A write-enabled, diagnostic diskette is required. NOTE Make sure that the diskette does not have more than one label attached to it. Multiple labels can cause damage to the drive or cause the drive to fail. Do the following to select the test device. 1. Boot from the diagnostics diskette and start the diagnostics program. 2. See if FDD Test is passed as the program runs to FDD Test. 3. Follow the instructions in the...

Removing the PC and Express Card dummy cards

Press the eject button to pop out the button. 2. Press it again (1) to pop out the PC dummy card (2). Remove the PC dummy card from the slot. 2. Press it again (1) to pop out the PC dummy card (2). Remove the PC dummy card from the slot. 3. Push the ExpressCard dummy card all the way in to eject it.

Removing the Antennas

See Removing the Battery Pack on page 60. 2. See Removing the Lower Cover on page 62. 3. See Removing the DIMM on page 63. 4. See Removing the WLAN Board Modules on page 64. 5. See Removing the Middle Cover and the Power Board on page 74. 6. See Removing the Keyboard on page 76. 7. See Removing the LCD Module on page 78. 8. See Removing the LCD Bezel on page 94. 9. See Removing the LCD module with the Brackets on page 95. 10. See Removing the Left and Right Hinge on page 97. 11. Release the...

Removing the WLAN Board Modules

See Removing the Battery Pack on page 60. 2. See Removing the SD dummy card on page 60. 3. See Removing the PC and ExpressCard dummy cards on page 61. 4. See Removing the Lower Cover on page 62. 5. Remove the tape holding the gray antenna. 6. Disconnect the antenna cables from the WLAN board. 7. Move the antenna away from the WLAN board and remove the two screws (F) on the WLAN board to release the WLAN board. 8. Detach the WLAN board from the WLAN socket. 8. Detach the WLAN board from the WLAN...

Removing the Modem Board

Removing the Battery Pack on page 60. Removing the Lower Cover on page 62. Removing the DIMM on page 63 Removing the WLAN Board Modules on page 64 Remove the 2 screws C securing the modem card. 6. Lift partially to detach the modem board from the main board. 6. Lift partially to detach the modem board from the main board. NOTE The modem cable is still attached to the modem board. 7. Disconnect the modem cable from the modem board.

Removing the Heatsink Fan Module

Acer Aspire 5732z Clean Fan

See Removing the Battery Pack on page 60. 2. See Removing the Lower Cover on page 62. 3. Disconnect the heatsink fan connector from FAN1 on the main board. 4. Remove the two screws C securing the heatsink fan module. 5. Remove the heatsink fan module from the main board. 5. Remove the heatsink fan module from the main board.

Boot Menu Acer Travelmate 5720

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Phoenix TrustedCore tm Setup Utility lt Tab gt , lt Shift-Tab gt , or lt Enter gt selects field. Select Item H 9 Change Values J Setup Defaults Exit Select Menu MEnHB Select Sub-Menu KM Save and Exit NOTE The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and...

Removing the Speaker Modules

Removing the Battery Pack on page 60. Removing the SD dummy card on page 60. Removing the PC and ExpressCard dummy cards on page 61. Removing the Lower Cover on page 62. Removing the DIMM on page 63. Removing the WLAN Board Modules on page 64. Removing the Hard Disk Drive Module on page 65. Removing the Optical Drive Module on page 66. Removing the Modem Board on page 70. Removing the Heatsink Fan Module on page 70. Removing the CPU and VGA Heatsink Module on page 71. Removing the CPU on page...

Removing the Internal Microphone and Web Camera

Acer Extensa 5220 Cover Monitor

'Removing the Battery Pack on page 60. 'Removing the Lower Cover on page 62. 'Removing the DIMM on page 63. 'Removing the WLAN Board Modules on page 64. 'Removing the Middle Cover and the Power Board on page 74 'Removing the Keyboard on page 76. 'Removing the LCD Module on page 78. 'Removing the LCD Bezel on page 94. 'Removing the LCD module with the Brackets on page 95. 'Removing the Left and Right Hinge on page 97. 'Removing the Antennas on page 98. Release the internal microphone cable from...

Removing the Battery Pack

Slide the battery lock unlock latch to the unlock position 1 . 3. Slide and hold the battery release latch to the release position 2 , then remove the battery from the main unit 3 . 3. Slide and hold the battery release latch to the release position 2 , then remove the battery from the main unit 3 .

NTI Shadow

Travelmate 5720

NTI Shadow allows users to schedule continuous backup jobs that copy the contents of one or more folders the backup source to another location the backup destination . The backup jobs are continuous because they are scheduled to regularly update the data in the backup folder either continuously or in user-defined intervals. You can schedule a job to run every certain number of minutes, on certain days at a specified time, or whenever any data in the backup source are modified. Shadow can also...

Information

The Information screen displays a summary of your computer hardware information. Phoenix TrustedCore tm Setup Utility ATAPI Model Name System BIOS Version VGA BIOS Version KBC Version Serial Number Asset Tag Number Product Name Manufacturer Name UUID XX-XXX XXXXXX.XXX.XXX.XXX.XXXXXX XX.XX NOTE The system information is subject to different models. This field shows the CPU type and speed of the system. This field shows the speed of the CPU. This field shows the model name of HDD installed on...

Navigating the BIOS Utility

There are six menu options Information, Main, Advanced, Security, Boot, and Exit. Follow these instructions To choose a menu, use the left and right arrow keys. To choose an item, use the up and down arrow keys. To change the value of a parameter, press F5 or F6. A plus sign indicates the item has sub-items. Press Enter to expand this item. Press Esc while you are in any of the menu options to go to the Exit menu. In any menu, you can load default settings by pressing F9. You can also press F10...

Removing the LCD Brackets

See Removing the Battery Pack on page 60. 2. See Removing the Lower Cover on page 62. 3. See Removing the DIMM on page 63. 4. See Removing the WLAN Board Modules on page 64. 5. See Removing the Middle Cover and the Power Board on page 74. 6. See Removing the Keyboard on page 76. 7. See Removing the LCD Module on page 78. 8. See Removing the LCD Bezel on page 94. 9. See Removing the LCD module with the Brackets on page 95. 10. See Removing the Inverter Board and FPC Cable on page 96. 11....

Removing the Inverter Board and FPC Cable

Removing the Battery Pack on page 60. Removing the Lower Cover on page 62. Removing the DIMM on page 63. Removing the WLAN Board Modules on page 64. Removing the Middle Cover and the Power Board on page 74. Removing the Keyboard on page 76. Removing the LCD Module on page 78. Removing the LCD Bezel on page 94. Removing the LCD module with the Brackets on page 95. Disconnect the inverter board cable from its connector, then disconnect the 2P cable on the inverter board 11. Detach the acetic...

Acer eNet Management

Travelmate 5720

Acer eNet Management helps you quickly connect to both wired and wireless networks in a variety of locations. To access this utility, select Acer eNet Management from the Empowering Technology toolbar or run the program from the Acer Empowering Technology program group in Start menu. You can also set Acer eNet Management to start automatically when you boot up your PC. Acer eNet Management automatically detects the best settings for a new location, while offering you the option to manually...

Windows Mobility Center

Lik Windows Mobility Center -IM Lik Windows Mobility Center -IM n 90 available H plugged in, charging r-. User Guide, J eJ Drivers and Utilities The Windows Mobility Center collects key mobile-related system settings in one easy-to-find place, so you can quickly configure your Acer system to fit the situation as you change locations, networks or activities. Settings include display brightness, power plan, volume, wireless networking on off, external display settings, display orientation and...

Removing the main board

See Removing the Battery Pack on page 60. 2. See Removing the SD dummy card on page 60. 3. See Removing the PC and ExpressCard dummy cards on page 61. 4. See Removing the Lower Cover on page 62. 5. See Removing the DIMM on page 63. 6. See Removing the WLAN Board Modules on page 64. 7. See Removing the Hard Disk Drive Module on page 65. 8. See Removing the Optical Drive Module on page 66. 9. See Removing the Modem Board on page 70. 10. See Removing the Heatsink Fan Module on page 70. 11. See...

Acer Travelmate 5320 Lcd Panel Compatibility

Launch Manager Acer 4315

Acer GridVista is a handy utility that offers four pre-defined display settings so you can view multiple windows on the same screen. To access this function, please go to Start gt All Programs and click on Acer GridVista. You may choose any one oyim3 g l jS2g jm settings ndiAgBjaSJBJH Double verticle , Triple primary at left , Triple primary at right , or Quad Acer Gridvista is dual-display compatible, allowing two displays to be partitioned indepently. Acer Gridvista is dual-display...

Touchpad Check

If the touchpad doesn't work, do the following actions one at a time to correct the problem. Do not replace a non-defective FRU 1. Reconnect the touchpad cables. After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movement can occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware problem. No service actions are necessary if the pointer movement stops in a short period of time.

Removing the CPU and VGA Heatsink Module

5738z Heatsink

See Removing the Battery Pack on page 60. 2. See Removing the Lower Cover on page 62. Remove the nine screws C securing the CPU and VGA heatsink module in place. NOTE There are only five 5 screws for the UMA module. NOTE There are only five 5 screws for the UMA module. 4. Slide out and remove the heatsink module.

Features

Below is a brief summary of the computer's many feature Intel Core 2 Duo Mobile Processor T7300 T7500 T7700 4 MB L2 cache, 2 2.2 2.4 GHz, 800 MHz FSB , or T7100 2 MB L2 cache, 1.8 GHz, 800 MHz FSB , or higher, supporting Intel 64 architecture for selected models Intel Core 2 Duo Mobile Processor T7200 T7400 T7600 4 MB L2 cache, 2 2.16 2.33 GHz, 667 MHz FSB , T5500 T5600 2 MB L2 cache, 1.66 1.83 GHz, 667 MHz FSB or T5200 T5300 2 MB L2 cache, 1.60 1.73 GHz, 533 MHz FSB ,or higher, supporting...

Front View

Extensa 5620 Fingerprint

Internal microphone for sound recording. 0.3 megapixel web camera for video communication. Also called Liquid-Crystal Display LCD , displays computer output. Buttons for launching frequently used programs. Comfortable support area for your hands when you use the computer. Touch-sensitive pointing device which functions like a computer mouse. Click buttons left, center and right The left and right buttons function like the left and right mouse buttons. The center button serves as Acer BioProtect...

Removing the LCD module with the Brackets

Acer 5720 5320 Series

Removing the Battery Pack on page 60. Removing the Lower Cover on page 62. Removing the DIMM on page 63. Removing the WLAN Board Modules on page 64. Removing the Middle Cover and the Power Board on page 74. Removing the Keyboard on page 76. Removing the LCD Module on page 78. Removing the LCD Bezel on page 94. Disconnect the cable from the camera board. 10. Remove the three screws E securing the LCD module and the Inverter panel. 10. Remove the three screws E securing the LCD module and the...

Removing the LCD Module

Removing the Battery Pack on page 60. Removing the Lower Cover on page 62. Removing the WLAN Board Modules on page 64. Removing the Middle Cover and the Power Board on page 74. Removing the Keyboard on page 76. 6. Remove the acetic tape and disconnect the LCD coaxial cable from the LCD1 connector on the main board and release it from the latch. 7. Remove the internal microphone cable from the INTMIC1 connector on the main board. 7. Remove the internal microphone cable from the INTMIC1 connector...

Acer ePresentation Management i

Acer Display Management

Acer ePresentation Management lets you project your computer's display to an external display device or projector using the hotkey lt Fn gt lt F5 gt . If auto-detection hardware is implemented in the system and the external display supports it, your system display will be automatically switched out when an external display is connected to the system. For projectors and external devices that are not auto-detected, launch Acer ePresentation Management to choose an appropriate display setting....

Removing the VGA board for Discrete model only

See Removing the Battery Pack on page 60. 2. See Removing the Lower Cover on page 62. 3. See Removing the Heatsink Fan Module on page 70. 4. See Removing the CPU and VGA Heatsink Module on page 71. Remove the two screws D securing the VGA board. 6. Carefully remove the VGA board from the main board. 6. Carefully remove the VGA board from the main board.

Power System Check

To verify the symptom of the problem, power on the computer using each of the following power sources 2. Connect the power adapter and check that power is supplied. 3. Disconnect the power adapter and install the charged battery pack then check that power is supplied by the battery pack. If you suspect a power problem, see the appropriate power supply check in the following list Check the Power Adapter on page 104 Check the Battery Pack on page 105 Unplug the power adapter cable from the...

Acer Empowering Technology

The Empowering Technology toolbar makes it easy for you to access frequently used functions and manage your new Acer system. Displayed by default in the upper half of your screen, it provides access to the following utilities Acer eNet Management hooks up to location-based networks intelligently. Acer ePower Management optimizes battery usage via customizable power plans. Acer ePresentation Management connects to a projector and adjusts display settings. Acer eDataSecurity Management protects...

PowerOn Self Test POST Error Message

The POST error message index lists the error message and their possible causes. The most likely cause is NOTE Perform the FRU replacement or actions in the sequence shown in FRU Action column, if the FRU replacement does not solve the problem, put the original part back in the computer. Do not replace a non-defective FRU. This index can also help you determine the next possible FRU to be replaced when servicing a computer. If the symptom is not listed, see Undetermined Problems on page 120. The...

Removing the Lower Cover

Acer 5720 Drivers

See Removing the Battery Pack on page 60. 2. See Removing the SD dummy card on page 60. 3. See Removing the PC and ExpressCard dummy cards on page 61. 4. Remove the seven screws B on the lower cover. 5. Use a plastic screw driver to carefully pry open the lower cover. 6. Remove the lower cover from the lower case.

Removing the CPU

Extensa Battery

See Removing the Battery Pack on page 60 2. See Removing the Lower Cover on page 62 3. See Removing the Heatsink Fan Module on page 70. 4. See Removing the CPU and VGA Heatsink Module on page 71. 5. Using a flat screwdriver, turn the CPU socket latch counter-clockwise to release the CPU, then remove the CPU. 5. Using a flat screwdriver, turn the CPU socket latch counter-clockwise to release the CPU, then remove the CPU. NOTE When installing the CPU, make sure to install the CPU with PIN 1 at...

Closed Front View

Left and right speakers deliver stereo audio output. Accepts Secure Digital SD, MultiMediaCard MMC , Memory Stick MS , Memory Stick Pro MS PRO , and xD-Picture Card. Note Only one card can operate at any given time. Accepts audio line-in devices e.g., audio CD player, stereo walkman, mp3 player Accepts inputs from external microphones. Connects to audio line-out devices e.g., speakers, headphones . Interfaces with infrared devices e.g., infrared printer and IR-aware computer . Enable disable...

Empowering Technology password

Before using Acer eLock Management and Acer eRecovery Management, you must initialize the Empowering Technology password. Right-click on the Empowering Technology toolbar and select Password Setup to do so. If you have not initialized the Empowering Technology password and run Acer eLock Management or Acer eRecovery Management, you will be asked to create it. NOTE If you lose the Empowering Technology password, there is no way to reset it except by reformatting your system. Make sure to...

External Modules Disassembly Flowchart

The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

Special

You can locate the Euro symbol and the US dollar sign at the upper-center and or bottom-right of your keyboard. 1. Open a text editor or word processor. 2. Either press lt gt at the bottom-right of the keyboard, or hold lt Alt Gr gt and then press the lt 5 gt key at the upper-center of the keyboard. 1. Open a text editor or word processor. 2. Either directly press the lt gt key at the bottom-right of the keyboard, or hold lt Shift gt and then press the lt 4 gt key at the upper-center of the...

Advanced

Phoenix TrustedCore tm Setup Utility Help Select Item H l Change Values Setup Defaults Exit J.Select Menu BJ33M Select Sub-Menu uJJ Save and Exit The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. The Advanced Host Controller Interface AHCI is a hardware mechanism that allows software to communicate with Serial ATA devices such as SATA hard drives. This field reports the memory size of the system. Memory size is fixed...

Acer eLock Management

Acer eLock Management is simple yet effective utility that allows you to lock removable storage, optical and floppy drive devices to ensure that data can't be stolen while your system is unattended. Removable Storage Devices includes USB disk drives, USB pen drives, USB flash drives, USB MP3 drives, USB memory card readers, IEEE 1394 disk drives, and any other removable storage devices that can be mounted as a file system when plugged into the system. Optical Drive Devices includes any kind of...

Lock Keys and embedded numeric keypad

The keyboard has three lock keys which you can toggle on and off. When Caps Lock is on, all alphabetic characters typed are in uppercase. When Num Lock is on, the embedded keypad is in numeric mode. The keys function as a calculator complete with the arithmetic operators , -, , and . Use this mode when you need to do a lot of numeric data entry. A better solution would be to connect an external keypad. Scroll Lock lt Fn gt lt F12 gt When Scroll Lock is on, the screen moves one line up or down...

Removing the Middle Cover and the Power Board

Removing Keyboard Extensa 5630

See Removing the Battery Pack on page 60. 2. Open the LCD screen all the way to facilitate the easy removal of the middle cover. 3. To remove the Middle Cover, carefully insert the plastic flat screwdriver under the side of the middle cover and gently pry up the middle cover. Continue prying on the other side until you could detach the Middle Cover. 4. Detach the cover and turn it over on the keyboard. 5. Disconnect the Power board cable from the main board and disconnect the Power board...

Hardware Specifications and Configurations

Intel Core 2 Duo Mobile Processor T7300 T7500 T7700 4 MB L2 cache, 2 2.2 2.4 GHz, 800 MHz FSB , or T7100 2 MB L2 cache, 1.8 GHz, 800 MHz FSB Intel Core 2 Duo Mobile Processor T7200 T7400 T7600 4 MB L2 cache, 2 2.16 2.33 GHz, 667 MHz FSB , T5500 T5600 2 MB L2 cache, 1.66 1.83 GHz, 667 MHz FSB or T5200 T5300 2 MB L2 cache, 1.60 1.73 GHz, 533 MHz FSB Intel Core Duo Mobile Processor T2250 T2350 T2450 2 MB L2 cache, 1.73 1.86 2 GHz, 533 MHz FSB Intel Celeron M processor 520 530 1 MB L2 cache, 1.6...

Acer ePower Management u

Acer ePower Management features a straightforward user interface for configuring your power management options. To access this utility, select Acer ePower Management from the Empowering Technology toolbar, run the program from the Acer Empowering Technology program group in Start menu, or right-click the Windows power icon in the system tray and select Acer ePower Management. Acer ePower Management comes with three predefined power plans Balanced, High performance and Power saver. You can also...

Windows Keys

The keyboard has two keys that perform Windows-specific functions. Pressed alone, this key has the same effect as clicking on the Windows Start button it launches the Start menu. It can also be used with other keys to provide a variety of functions lt gt Open or close the Start menu lt gt lt D gt Display the desktop lt gt lt E gt Open Windows Explore lt gt lt F gt Search for a file or folder lt gt lt G gt Cycle through Sidebar gadgets lt gt lt L gt Lock your computer if you are connected to a...

FRU Field Replaceable Unit List

This chapter gives you the FRU Field Replaceable Unit listing in global configurations of TravelMate 5720 5320 and Extensa 5620 5220. Refer to this chapter whenever ordering for parts to repair or for RMA Return Merchandise Authorization . Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information available on your regional web or channel. For whatever reasons a part number change is made, it will not be noted on the printed Service Guide. For ACER AUTHORIZED...

Acer eData Security Management m

Acer Edatasecurity Management

Acer eDataSecurity Management is an encryption utility that protects your files from being accessed by unauthorized persons. It is conveniently integrated with Windows Explorer as a shell extension for quick data encryption decryption and also supports on-the-fly file encryption for Lotus Notes and Microsoft Outlook. The Acer eDataSecurity Management setup wizard will prompt you for a supervisor password and default encryption password. This password will be used to encrypt files by default, or...

Remove Hddbios Utility

Acer 5620 Bios Password

This section provide you with removing HDD BIOS method If you key in wrong HDD password for three time, HDD password error code would display on the screen. See the image below. If you need to solve HDD password locked problem, you can run HDD_PW.EXE 1. Key in hdd_pw 15494 0 3. Choose one upper-case string F S iRssuoi gt d gt dirAj Un lune in rive F has rte- lahel. Unlusie S riai Number is D4F6-823fi F VpassMord hdd._au IS49 4 8 un Iock6 . e xe yl .1 2 flay BI OK _y U. E KE H DE gt _ PU. EX E...

External Cdrom Drive Check

Do the following to isolate the problem to a controller, drive, or CD-ROM. Make sure that the CD-ROM does not have any label attached to it. The label can cause damage to the drive or can cause the drive to fail. Do the following to select the test device 1. Boot from the diagnostics diskette and start the diagnostics program. 2. See if CD-ROM Test is passed when the program runs to CD-ROM Test. 3. Follow the instructions in the message window. If an error occurs, reconnect the connector on the...

Removing the Left and Right Hinge

Middle Cover and the Power Board on page 74. LCD module with the Brackets on page 95. 10. Remove the two screws E securing the left and right hinge to the back cover. 11. Remove the left and right hinge from the back cover. 11. Remove the left and right hinge from the back cover.

Acer eRecovery Management

User Guide Acer 5620

Acer eRecovery Management is a versatile backup utility. It allows you to create full or incremental backups, burn the factory default image to optical disc, and restore from previously created backups or reinstall applications and drivers. By default, user-created backups are stored to the D drive. Acer eRecovery Management provides you with Password protection Empowering Technology password Full and incremental backups to hard disk or optical disc Creation of backups Factory default image...

Left View

Connects to a Kensington-compatible computer security lock. Connects to an Ethernet 10 100 1000-based network. Connects to a display device e.g., external monitor, LCD projector . Connects to a television or display device with S-video input. Connects to USB 2.0 devices e.g., USB mouse, USB camera .

Chapter

Use the following procedure as a guide for computer problems. NOTE The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. 2. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation. 3. Use the following table with the verified symptom to determine which...

Removing theTouch Pad Board Module

Acer Travelmate 5720 Touch

'Removing the Battery Pack on page 60. 'Removing the SD dummy card on page 60. Removing the PC and ExpressCard dummy cards on page 61. Removing the Lower Cover on page 62. Removing the DIMM on page 63. Removing the WLAN Board Modules on page 64. Removing the Hard Disk Drive Module on page 65. Removing the Optical Drive Module on page 66. Removing the Modem Board on page 70. Removing the Heatsink Fan Module on page 70. Removing the CPU and VGA Heatsink Module on page 71. Removing the CPU on page...

Undetermined Problems

The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedures to isolate the failing FRU do not isolate non-defective FRU . NOTE Verify that all attached devices are supported by the computer. NOTE Verify that the power supply being used at the time of the failure is operating correctly. See Power System Check on page 103. 2. Visually check them...

Removing the LCD Bezel

See Removing the Battery Pack on page 60. 2. See Removing the Lower Cover on page 62. 3. See Removing the DIMM on page 63. 4. See Removing the WLAN Board Modules on page 64. 5. See Removing the Middle Cover and the Power Board on page 74. 6. See Removing the Keyboard on page 76. 7. See Removing the LCD Module on page 78. 8. Remove the four upper bezel screw caps and the four lower bezel caps. 9. Remove the eight screws A on the LCD module in the order as shown. 10. Carefully pry open the LCD...

Disclaimer

The information in this guide is subject to change without notice. Acer Incorporated makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties of merchantability or fitness for any particular purpose. Any Acer Incorporated software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer and not Acer Incorporated, its distributor, or its...

Removing the Hard Disk Drive Module

Acer Travelmate 5220 Expresscard

Removing the Battery Pack on page 60. Removing the SD dummy card on page 60. Removing the PC and ExpressCard dummy cards on page 61 Removing the Lower Cover on page 62. 6. Disconnect the hard disk module from the connector by pulling on the mylar tab on the hard disk module. 6. Disconnect the hard disk module from the connector by pulling on the mylar tab on the hard disk module. NOTE To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. 8. Remove the...

Columbia Tangiz Block Diagram Project code

2.OG 71.MEROM.AOtl 2.IU, 71.MEROM.BOLI , . 1 7 7.1 CPUI F DDR Memory I F INTEGRATED GRAHPICS LIDS, CRT I F 71. RISI.IIIII 6,7,8,9,10,11 6PCIe ports PCI PCI BRIDGE ACPI 1.1 3 S l l 1PATA 66 100 10 USB 2.0 1.1 ports ETHERNET lO lOO lOOOMbE High Definition Audio IPC I F Serial Peripheral I F Matrix Storage TechnologyfDO A ctive Managemnet TechnologyfDO LD05V_S0 lt 9. 5A 1D8V_S3 lt 8. 5A

Phoenix BIOS Beep Codes

Disable Non-Maskable Interrupt NMI Initialize chipset with initial POST values Initialize caches to initial POST values Load alternate registers with initial POST values Restore CPU control word during warm boot Initialize PCI Bus Mastering devices Initialize cache before memory autosize Reset Programmable Interrupt Controller RAM failure on data bits xxxx of low byte of memory bus Enable cache before system BIOS shadow RAM failure on data bits xxxx of high byte of memory bus Advanced...

Travel Mate and Extensa Exploded Diagram

Synaptics Tm51

NOTE The FRU List is not for TravelMate 5720 5320 and Extensa 5620 5220. The FRU list for TravelMate 5720 5320 and Extensa 5620 5220 is not ready as the service guide released. We will update the FRU list as soon as we got the latest FRU list. TravelMate 5720 5320 and Extensa 5620 5220 FRU List TravelMate 5720 5320 and Extensa 5620 5220 FRU List BATTERY PACK LI 6CELL 2.0MAH PANASONIC BATTERY PACK LI 6CELL 2.4MAH PANASONIC WIRELESS LAN BOARD 802.11 BG FOXCONN ATHEROS EU WIRELESS LAN BOARD 802.11...

Separating the Upper Case from the Lower Case

Cmos Battery Extensa Mother Board

Removing the Battery Pack on page 60. Removing the SD dummy card on page 60. Removing the PC and ExpressCard dummy cards Removing the Lower Cover on page 62. Removing the DIMM on page 63. Removing the WLAN Board Modules on page 64. Removing the Hard Disk Drive Module on page 65 Removing the Optical Drive Module on page 66. Removing the Modem Board on page 70. Removing the Heatsink Fan Module on page 70. Removing the CPU and VGA Heatsink Module on page 71. Removing the VGA board for Discrete...

Preface

Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for Acer s global product offering. To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine e.g. add-on card, modem, or extra memory capability . These LOCALIZED FEATURES will NOT be...

Index of Error Messages

Equipment Configuration Error Causes 1. CPU BIOS Update Code Mismatch 2. IDE Primary Channel Master Drive Error THe causes will be shown before Equipment Configuration Error Memory Error at xxxx xxxx xxxxh R xxxxh, W xxxxh In this situation BIOS will issue 4 short beeps then shut down system, no message will show. In this situation BIOS will shut down system, not show message. Reconnect hard disk drive connector. Load Default Settings in BIOS Setup Utility. Hard disk drive System board see...

Index of SymptomtoFRU Error Message

LCD backlight doesn t work LCD is too dark LCD brightness cannot be adjusted LCD contrast cannot be adjusted Enter BIOS Utility to execute Load Setup Default Settings, then reboot system. Reconnect the LCD connectors. Keyboard if contrast and brightness function key doesn t work . LCD inverter ID LCD cable LCD inverter LCD Unreadable LCD screen Missing pels in characters Abnormal screen Wrong color displayed LCD has extra horizontal or vertical lines displayed. LCD inverter ID LCD inverter LCD...

BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into your computer s BIOS Basic Input Output System . Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press F2 during POST when Press lt F2 gt to enter Setup message is prompted on the bottom of screen ....

Topview

Bluetooth Device Travelmate 5720

Standard Operation Procedures of Password Bypassing and BIOS Recovery For RD and CSD to debug easily, the system provide one hardware DIP switch for Bypassing Password Check, and one Hotkey to enable BIOS Recovery. 2. Hotkey to enable BIOS Recovery Fn ESC, then Power Button. To use this function, it is strongly recommended that the AC adapter is connected to the system and plug-in to a wall outlet and the Battery is also in the system Bypassing Password Check SW1 If the user has set Password...

Boot Acer Travelmate 5720

This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the distette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay. lt gt and lt - gt moves the device lt f gt and lt r gt specifies the lt Shift 1 gt enables or disables

Disassembly Process

The disassembly process is divided into the following stages External module disassembly The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence. Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order. Main Screw List