Removing the WLAN Board Modules

  1. See "Removing the Battery Pack" on page 60.
  2. See "Removing the SD dummy card" on page 60.
  3. See "Removing the PC and ExpressCard dummy cards" on page 61.
  4. See "Removing the Lower Cover" on page 62.
  5. Remove the tape holding the gray antenna.
Acer 5738g Expresscard

6. Disconnect the antenna cables from the WLAN board.

7. Move the antenna away from the WLAN board and remove the two screws (F) on the WLAN board to release the WLAN board.

Aspire 1360 Wlan

Step

Size (Quantity)

Color

Torque

1~2

M2 x L3 (2)

Silver

1.6 kgf-cm

  1. Detach the WLAN board from the WLAN socket.
  2. Detach the WLAN board from the WLAN socket.
Cmos Acer Battery Extensa 5210

NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment