Removing the Middle Cover and the Power Board

  1. See "Removing the Battery Pack" on page 60.
  2. Open the LCD screen all the way to facilitate the easy removal of the middle cover.
  3. To remove the Middle Cover, carefully insert the plastic flat screwdriver under the side of the middle cover and gently pry up the middle cover. Continue prying on the other side until you could detach the Middle Cover.

4. Detach the cover and turn it over on the keyboard.

5. Disconnect the Power board cable from the main board and disconnect the Power board cable.

6. Remove the Middle Cover together with the Power board.

7. Remove the one screw (F) securing the Power board to the middle cover, and remove the Power board from the middle cover.

Step

Size (Quantity)

Color

Torque

1

M2 x L3 (1)

Silver

1.6 kgf-cm

Removing the Keyboard

  1. See "Removing the Battery Pack" on page 60..
  2. See "Removing the Middle Cover and the Power Board" on page 74.

Remove the two screws (F) securing the keyboard to the upper case.

Remove the two screws (F) securing the keyboard to the upper case.

Step

Size (Quantity)

Color

Torque

1~2

M2 x L3 (2)

Silver

1.6 kgf-cm

  1. Carefully pry the keyboard out of the latch and slide it out; then turn it over on the touchpad area.
  2. Carefully pry the keyboard out of the latch and slide it out; then turn it over on the touchpad area.
Schematics For Acer Aspire 5515
5. Disconnect the keyboard cable from the main board to remove the keyboard.
Schematics For Acer Aspire 5515
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment