Removing the main board

  1. See "Removing the Battery Pack" on page 60.
  2. See "Removing the SD dummy card" on page 60.
  3. See "Removing the PC and ExpressCard dummy cards" on page 61.
  4. See "Removing the Lower Cover" on page 62.
  5. See "Removing the DIMM" on page 63.
  6. See "Removing the WLAN Board Modules" on page 64.
  7. See "Removing the Hard Disk Drive Module" on page 65.
  8. See "Removing the Optical Drive Module" on page 66.
  9. See "Removing the Modem Board" on page 70.
  10. See "Removing the Heatsink Fan Module" on page 70.
  11. See "Removing the CPU and VGA Heatsink Module" on page 71.
  12. See "Removing the CPU" on page 73.
  13. See "Removing the VGA board (for Discrete model only)" on page 73.
  14. See "Removing the Middle Cover and the Power Board" on page 74.
  15. See "Removing the Keyboard" on page 76.
  16. See "Removing the LCD Module" on page 78.
  17. See "Separating the Upper Case from the Lower Case" on page 81.
  18. Disconnect the Bluetooth cable from the BLUE1 connector on the main board.

19. Disconnect the speaker cable from the SPKR1 on the main board.

20. Remove the two screws (C) holding the main board.

Step

Size (Quantity)

Color

Torque

1~2

M2 x L4 (2)

Silver

1.6 kgf-cm

  1. Carefully detach the main board and turn it over to access the USB board cable.
  2. Carefully detach the main board and turn it over to access the USB board cable.

22. Detach the USB board cable from the USBCN1 on the main board.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment