Removing the LCD Bezel

  1. See "Removing the Battery Pack" on page 60.
  2. See "Removing the Lower Cover" on page 62.
  3. See "Removing the DIMM" on page 63.
  4. See "Removing the WLAN Board Modules" on page 64.
  5. See "Removing the Middle Cover and the Power Board" on page 74.
  6. See "Removing the Keyboard" on page 76.
  7. See "Removing the LCD Module" on page 78.
  8. Remove the four upper bezel screw caps and the four lower bezel caps.

9. Remove the eight screws (A) on the LCD module in the order as shown.

0 0 0 0

Step

Size (Quantity)

Color

Torque

1~8

M2.5 x L6 (8)

Black

3.0 kgf-cm

  1. Carefully pry open the LCD bezel and remove the bezel from the LCD module.
  2. Carefully pry open the LCD bezel and remove the bezel from the LCD module.
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment