Disassembling the LCD Module

  1. Remove the two LCD rubber and the two LCD screw caps.
  2. Remove the four screws as shown.
  3. Detach the LCD bezel carefully.
  1. Remove one screw that secures the LCD inverter.
  2. Disconnect the LCD inverter from the LCD.
  3. Then disconnect the LCD inverter cable.
  1. Remove the four screws holding the LCD hinges; two on each side.
  2. Then take out the LCD assembly from the LCD panel.
  3. Remove the eight screws holding the LCD brackets; four on the left and four on the right.
  1. Remove the LCD brackets from the LCD.
  2. Tear off the mylar fastening the LCD wire cable.
  3. Disconnect the LCD wire cable.

Was this article helpful?

0 0

Post a comment