Removing the USB Board Module

1.

See

'Removing the Battery Pack" on page 54.

2.

See

'Removing the SD dummy card" on page 55.

3.

See

'Removing the PC and ExpressCard dummy cards" on page 56

4.

See

'Removing the Lower Cover" on page 57.

5.

See

'Removing the DIMM" on page 58.

6.

See

'Removing the WLAN Board Modules" on page 59.

7.

See

'Removing the Hard Disk Drive Module" on page 61.

8.

See

'Removing the Optical Drive Module" on page 62.

9.

See

'Removing the Middle Cover" on page 66.

10.

See

'Removing the Keyboard" on page 69.

11.

See

'Removing the Heatsink Fan Module" on page 70.

12.

See

'Removing the CPU and VGA Heatsink Module" on page 71.

13.

See

'Removing the CPU" on page 72.

14.

See

'Removing the VGA Board (Discrete Model only)" on page 73.

15.

See

'Removing the LCD Module" on page 74.

16.

See

'Separating the Upper Case from the Lower Case" on page 76.

17. Remove the one screw (B) securing the USB board to the lower case.

Step

Size (Quantity)

Color

Torque

1

M2 x L4 (1)

Silver

1.6 kgf-cm

  1. Lift the USB board and disconnect the cable from USBCN1 on the USB board.
  2. Lift the USB board and disconnect the cable from USBCN1 on the USB board.
5630z Inverter
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment