Executing AFlash

IMPORTANT:If this diskette is not bootable, do the following actions before you use it:

  1. Create a bootable disk.
  2. Copy all AFlash files into this bootable diskette.
  3. Put the bootable disk into TravelMate 505 series mobile, then re-boot.

IMPORTANT:Never turn off the system power while Flash BIOS is programming. This will damage your system.

4. After Flash BIOS is done, reboot the system.

NOTE: If any problems occured during BIOS updated, refer to "Index of PQA Diagnostic Error Code, Message" on page 70 for troubleshooting.

0 0

Post a comment