Removing the WLAN Board Modules

1.

See

"Removing the Battery Pack" on page 51.

2.

See

"Removing the SD Dummy Card" on page 51.

3.

See

"Removing the Express Dummy Card" on page 52.

4.

See

"Removing the Lower Cover" on page 53.

5.

Remove the mylar tape from the cable.

6. Disconnect the two antenna cables from the WLAN board, then move the antennas away from the board.

Video Chip Acer Aspire 7520 7220

Step

Size (Quantity)

Color

Torque

1~2

M2 x L3 (2)

Silver

1.6 kgf-cm

  1. Detach the WLAN board from the WLAN socket.
  2. Detach the WLAN board from the WLAN socket.
Extensa 4220 Removing The Hard Disk

NOTE: When attaching the antennas back to the WLAN board, make sure the cable are routed properly.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment