Removing the Switch Cover

CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is recommended that you use your hands to remove the Switch Cover.

  1. See "Removing the Battery Pack" on page 46.
  2. Locate and remove the five securing screws as shown.

Step

Size

Quantity

Screw Type

Switch Cover

M2*3

5

iÄb

  1. Turn the computer over and open the LCD module fully to expose the Switch Cover. IMPORTANT:The LCD module must be extended horizontally to remove the switch cover.
  2. Starting from right to left, pry the right corner up as shown.

5. Lift the Switch Cover clear of the chassis.

  1. See "Removing the Battery Pack" on page 46.
  2. See "Removing the Switch Cover" on page 59.
  3. Remove the two screws securing the keyboard to the upper case.

Step

Size

Quantity

Screw Type

Keyboard

2

M2*3

A*

  1. Lift the keyboard as shown to remove from the chassis.
  2. Lift the keyboard as shown to remove from the chassis.
Acer Replace Keyboard 4530 Series

5. Turn the keyboard over and pull back the securing latch to release the FFC.

6. Remove the keyboard from the chassis.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • olle
    How to open keyboard acer 4530?
    9 years ago

Post a comment