Advanced

The Advanced screen allows the user to configure the various advanced BIOS options.

IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values. If making settings to items on these pages causes your system to malfunction or prevents the system from booting, open BIOS and choose Load Optimal Defaults in the Exit menu to boot up normally.

Advanced

PhoenixBIOS Setup Utility

Advanced

  • Advanced Chipset Control
  • ASF Configuration
  • Advanced Chipset Control

F1 Help SC Exit

F1 Help SC Exit

Select Item Select Menu

Security Power Boot AMD Exit

Item Specific Help

►ASF Configuration

PS/2 Mouse

[Auto Detec]

IDE Controller:

[Disabled]

SB Power Saving Feature:

[Enabled]

On chip SATA

[Enabled]

SATA Class ID

[IDE-ACHI C]

SATA IDE Combined mode

[Disabled]

PATA Channel Config

[SATA as pr]

ACHI ROM POST delay

[Disabled]

USB Host Controller:

[Enabled]

Legacy USB Support:

[Enabled]

Option ROM Placement

[Disabled]

Large Disk Access Mode:

[DOS]

Installed O/S:

[Other]

Reset Configuration Data

[No]

Processor Assisted Virtualization:

[Enabled]

Select Item Select Menu

Change Values er Select^Sub-Menu

F9 F10

Select options for Advanced Chipset features.

F9 Setup Defaults Save and Exit

The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Submenu Items

Advanced Chipset Control

Enter the Advanced Chipset Control menu.

  • Advanced NB Options
  • Advanced SB Options

Configuration

Enter the ASF Configuration menu.

  • ASF OS Device Availability
  • Minimum Watchdog Timeout
  • BIOS Boot Timeout
  • OS Boot Timeout
  • Power-on wait time

PS/2 Mouse

Enable or Disable PS/2 Mouse port IRQ12.

Option: Auto Detect, Enabled, or Disabled

IDE Controller

Configure the Integrated Local Bus IDE Controller.

Option: Disabled, Both, or Primary

SB Power Saving Feature

Enable SB Power Saving Feature.

Option: Enabled or Disabled

Parameter

Description

Submenu Items

On chip SATA

Enable On chip SATA.

Option: Enabled or Disabled

SATA Class ID

Select the SATA Class ID.

Option: IDE-ACHI Class,

HyperFlash Class, IDE-HyperFlash Class, IDE Native Mode, Raid Class, ACHI Class, or IDE Legacy Mode

SATA IDE Combined mode

Set SATA IDE Combined mode.

Option: Disabled or Enabled

PATA Channel Config

Set the SATA channel as Primary or Secondary channel.

Option: SATA as primary or SATA as secondary

ACHI ROM POST delay

Select SATA option ROM POST delay.

Option: Disabled, 7, 6, 5, 4, 3, 2, or 1 second(s) delay

USB Host Controller

Enable or disable USB hardware.

Option: Enabled or Disabled

Legacy USB Support

Enable support for Legacy Universal Serial Bus.

Option: Enabled or Disabled

Option ROM Placement

Determines which peripheral devices can be booted.

NOTE: Changes to this setting can cause the system to halt during boot.

Option: Disabled, Temporary, or E000 Extend

Large Disk Access Mode

Set the Large Disk Access mode. Different O/S require different drive geometry representations. Select Other for UNIX, Novell NetWare, or other O/S.

Option: DOS or Other

Installed O/S

Set the most commonly used O/S on the system.

Option: Other, Win2000, WinMe, Win98, or Win95

Reset

Configuration Data

Clear Extended System Configuration Data (ESCD) area.

Option: No or Yes

Processor

Assisted

Virtualization

Enable the hardware visualization support.

Option: Enabled or Disabled.

Was this article helpful?

0 0

Post a comment