Booteo Acer 4330

This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay.

InsydeH20 Setup Utility

Information Main Advanced Security Power

Boot

Boot priority order:

  1. IDE0 : ST9250827AS
  2. IDE1 : Slimtype DVD a DS8A2S
  3. USB FDD :
  4. Network Boot : MBA v11.0.3 Slot 0500
  5. USB CDROM :

F1 Help SC Exit

Select Item Select Menu

Select Item Select Menu

Change Values Select^SubMenu

Item Specific Help

Use <t> or to select a devce, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

Change Values Select^SubMenu

Setup Default Save and Exit

Setup Default Save and Exit

Exit

The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.

InsydeH20 Setup Utility

Information Main Advanced Security Power Boot

Exit

Exit Saving iving Changes

Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes

Help C Exit

Help C Exit

Select Item Select Menu

Select Item Select Menu

Change Valies er Select^SubMenu

Exit

Change Valies er Select^SubMenu

[9 Setup Default 0 Save and Exit

The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS.

Exit Discarding Changes

Exit utility without saving setup data to CMOS.

Load Setup Default

Load default values for all SETUP item.

Discard Changes

Load previous values from CMOS for all SETUP items.

Save Changes

Save Setup Data to CMOS.

BIOS Flash Utility

The BIOS flash memory update is required for the following conditions:

  • New versions of system programs
  • New features or options
  • Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM.

NOTE: Create a Crisis Recovery Media (such as USB HDD) before you use the Phlash utility.

NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.

NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not contain enough power to finish BIOS flash, the system will not boot as the BIOS is not loaded.

Perform the following steps to use the Flash Utility:

  1. Press F2 during boot to enter the Setup Menu.
  2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Insydeh20 Boot Priority Order

3. Execute the IFLASH.BAT batch file to update BIOS (Read xxxxx.fd to Memory).

Insyie Flash Utility for InsydaHZO

Iters Jon 1.11

Initializing

File loading 100 *

Current BIOS Model nans : Haw BIDS Hödel mm :

Currant BIOS version: uh.IS.TBI Hm BIOS vers Ion : UH 3)

4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.

C : \CLS0Ö20ftsCL50B28fl> I f lash

C:^LSe8ZaftNCL5flllZm>flAshlt ICL58HM. fd 'b "Te Uarnnlng: No AC power connect

C :NCL5eeZ8RNCLS8BZm>

Plug in the AC power to continue.

5. Flash is complete when the following message displays.

File Icktdimj 1MB *

Current BIOS version: UB.18.184 Nee BIOS version: UB.20

Updating Block et »IIUUUU Flesh complete t

6. Shutdown or reboot base on iflash.bat command.

Remove HDD/BIOS Utility

This section provide you with removing HDD/BIOS method:

Remove HDD Password:

• If you key in wrong HDD password three times, Hdd password error code displays. See the image below.

Acer Travelmate 5520 Bios

To reset the HDD password, run HDD_PW.EXE as follows:

0 0

Responses

  • joe
    How to select boot device in acer 4330?
    8 years ago
  • Adonay
    How to boot from dvd rom accer extenca 4330 ?
    8 years ago
  • arja
    How to set up boot priority in acer travelmate laptop?
    8 years ago
  • GARY
    How to network boot an acer travelmate?
    8 years ago
  • libera maria
    How to reset bios password on acer 4330?
    7 years ago

Post a comment