LCD module disassembly

Laptop Repair Made Easy

Laptop Repair Made Easy

Get Instant Access

  1. Remove the six screw pads.
  2. Remove the six screws that secure the LCD bezel.

3. Release the latches one by one. Please note that the bezel is fragile. Need to follow the following disassembly pictures from left to right.

4. Pull the bezel a little bit forward that paralleled LCD cover and remove the LCD bezel.

  1. Pull the inverter board out.
  2. Disconnect the LVDS cable from the inverter board.
  3. Disconnect the LCD cable from the inverter board.
  4. Remove the inverter board.
  1. Remove the four screws that secure the LCD and disconnect the CCD cable.
  2. Remove the LCD from the cover assembly.
  3. Remove the screw securing the CCD.
  4. Remvoe the CCD from the cover assembly.
  5. Remove the wireless antenna from the cover assembly.
  6. Remove the wireless antenna from the cover assembly.
  1. Remove the two screws that secure the left LCD bracket.
  2. Remove the left LCD bracket from the LCD.
  3. Remove the two screws that secure the right LCD bracket.
  4. Remove the right LCD bracket from the LCD.
  5. Remove the two screws that secure the left LCD bracket.
  6. Remove the left LCD bracket from the LCD.
  7. Remove the two screws that secure the right LCD bracket.
  8. Remove the right LCD bracket from the LCD.
  1. Turn the LCD back.
  2. Tear off the tape on theLCD cable.
  3. Disconnect the LCD cable from the LCD.
  4. This completes the LCD disassembly.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment