Acer Travel Mate 2400 Boot Optaon

Insyde Software SCU

Sep 20, 2005

11:40:09 AM

Main Advanced

Security

Boot

Exit

CPU = Intel® Pentium ® M CPU speed = 1.73 GHz L2 Cache = 2048 KB

System Memory = 640 KB

Extended Memory = 247MB VGA Memory = 8 MB

Setup system date, time. Enable boot logo and get system information.

NOTE: The system information is subject to different models.

Parameter

Description

Product Name

This field displays the prodcut name of the system.

Manufacturer Name

This field displays the manufacturer name of the system

BIOS Version

This field displays the BIOS version of the system.

VGA Version

This field shows the VGA firmware version of the system.

HDD Model Name

This field shows the model name of HDD installed on primary IDE master.

HDD Serial Number

This field displays the serial number of HDD installed on primary IDE master.

ATAPI Mode Name

This field displays the mofel name of devices installed on secondary IDE master. The hard disk drive or optical drive model name is automatically detected by the system.

Serial Number

This field displays the serial number of this unit.

Asset Tag

This field displays the asset tag of this unit.

UUID

This will be visible only when an internal LAN device is presenting. UUID=32bytes

CPU

This field shows the brand name of the system CPU.

—Devices------------------------------------------------

Product Name = TravelMate 3210 Light Manufacture Name = Acer BIOS Version = V1.00

VGA Version = 3104

HDD Model Name = HTC426040G9AT00 HDD Serial Number = 4EB660

ATAPI Model Name = MATSHITADVD-RAM UJ-832S

Serial Number = ( 32 bytes) Asset Tag = (32 bytes) UUID = (16 bytes)

Parameter

Description

CPU speed

L2 Cache

This field displays CPU L2 cache size. It varies in CPU type.

System Memory

This field reports the memory size of system base memory. The size is fixed to 640 KB.

Extended Memory

This field reports the memory size of the extended memory in the system. Extended memory size = Total memory size - 2MB

Discrete = 64 or 128MB (depends on actual VRAM size) TurboCache = 32MB (actual TurboCache VRAM size) Intel(R) 915 DVMT: you can select the following options:

  1. 64MB (8MB pre-allocated + 56MB DVMT)
  2. 128MB (8MB pre-allocated + 128MB DVMT)-Default value
  3. Max DVMT (160MB on 256MB system memory, 224MB on 512 and above system memory).

The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.

The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.

Insyde Software SCU

Advanced

Date and Time

Power On Display

Sep 30, 2005 11:40:09 AM

Security

Boot

Exit

-Power On Display-

V Quiet Boot

V LCD Auto DIM

v Network Boot

_ F12 Boot Menu v D2D Recovery

(• )

Auto

( )

Both

OK B

Cancel

Press <Tab> key to select a control. <OK> button or <Enter> key accept entries. <Cancel> button or <Esc> key reject entries. Use cursor, spacebar, and numeric keys to change values. <Alt> key activates accelerators.

Main

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

Date and Time

The hours are displayed with 12 hour format. The values setin these two fields take effect immediately.

Quiet Boot

Determines if the system will display customer logo and summary screen or not. Enable: Customer logo is displayed, and summary screen is disabled. Disabled: Custoemr logo is not displayed, and summary screen is enabled.

Option: Enabled or Disabled

Power on display

Auto: During power process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode.

Both: Simultaneously enable both the integrated LCD screen and the system's external video port (for an external CRT or projector).

Option: Auto or Both

LCD Auto Dim

Determines if the system will automatically dim the LCD brightness in order to save power when AC is not present.

The system will support an automatic dimming of the LCD backlight when the AC power is NOT available (running on battery power).

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: Disabled or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled

NOTE: You can also enable Acer disc-to-disc system recovery via Alt+F10 during POST.

NOTE: You can also enable Acer disc-to-disc system recovery via Alt+F10 during POST.

Was this article helpful?

0 0

Responses

  • Jessie Bailey
    How to boot acer travelmate 2400?
    9 years ago
  • ELLA
    How to enable boot menu in travelmate 2400?
    9 years ago
  • Eric
    How to internally connect bluetooth for acer travelmate 2400?
    9 years ago
  • alfred
    How to boot through a network in acer TravelMate 2400 series?
    3 years ago

Post a comment