Removing the Pcmcia Slot

  1. See "Removing the Battery" on page 62
  2. See "Removing the Hard Disk Drive Module" on page 63
  3. See "Removing the Middle Cover" on page 68
  4. See "Removing the Keyboard" on page 69
  5. See "Removing the CD-ROM Drive Module" on page 69
  6. See "Removing the Heat Plate" on page 70
  7. See "Removing the LCD Module" on page 71
  8. See "Removing the RTC Battery" on page 79
  9. See "Removing the CPU Heat Sink" on page 80
  10. See "Removing the Upper Case" on page 81
  11. See "Removing the Floppy Disk Drive Module" on page 84
  12. See "Removing the Audio Board" on page 85
  13. See "Removing the Charger Plate" on page 86
  14. See "Removing the Main Board" on page 87
  15. Remove four screws from the PCMCIA plate to remove the plate.

16. Detach the PCMCIA slot from the main board.

NOTE: 1. Please follow the numeric orders such as 1, 2, 3, and 4 to screw the PCMCIA plate to the main board. It is suggested that you reverse the sequence when you remove the screws.

2. Please note that the I/O port bracket should be attached to the main board before assembling the PCMCIA slot to the main board.

0 0

Post a comment