Main System Settings

The Basic System Settings screen allows you to set the system date and time.

PhoenixBIOS Setup Utility

Information

Main

Advanced

Security

Boot

Exit

System Time:

[08:46:55]

System Date:

[12/03/2002]

Boot Display

[Auto]

QuickBoot Mode

[Enabled]

Boot-time Diagnostic Screen:

[Disabled]

Boot on LAN

[Disabled]

Hotkey Beep

[Enabled]

Auto Dim

[Enabled]

F12 Multi-Boot

[Enabled]

Item Specific Help

<Tab>, <Shift-Tab>, or <Enter> selects field.

F1 Help Select Item F5/F6 Change Values F9 Setup Defaults

Esc Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit

The following table describes the parameters in this screen.

Parameter

Description

Format

System Time

Sets the system time.

HH:MM:SS (hour:minute:second)

System Date

Sets the system date.

DDD MMM DD, YYYY (day-of-the-week month day, year)

Boot Display

Sets the display device on boot up. When set to Auto, the computer automatically determines the display device. If an external display device (e.g., monitor) is connected, it becomes the boot display. When set to Both, the computer outputs to both the computer display screen and an external display device if one is connected.

Auto or Both

Quick Boot Mode

Allow the system to skip certain tests while booting. This will decrease the time needed to boot the system.

Enabled or Disabled

Boot-time Diagnostic Screen

Boot-time diagnostic during boot. Help: Enable to show the BIOS logo picture screen on boot up.

Disabled or Enabled

Parameter

Description

Format

Boot on LAN

When it is enabled, a remote host with an appropriate boot image can boot this computer via the internal LAN.

Disabled or Enabled

Hotkey Beep

Help: Enable or disable hotkey beep.

Enabled or Disabled

Auto Dim

Help: The system will support an automatic dimming of the LCD backlight when the AC power is NOT available (running on battery power). Options: Enabled or Disabled Help: Users could choose if to display 'Fn-F12 for multiboot' message during post

Enabled or Disabled

F12 Multi-Boot

When "Fn-F12" is pressed, a multiboot message will be displayed during POST.

Enabled or Disabled

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • fikru
    How to enable acer tm 230 bios wifi setting?
    8 years ago

Post a comment