Replacing the Mainboard

1. Place the main board into the lower cover on an angle first aligning the I/O ports.

Step

Screw

Quantity

Screw Type.

Main Board Assembly

2*3

1

  1. Connect the speaker connector.
  2. Connect the speaker connector.

1. Thread the antenna cables through to the bottom side of the lower cover and place in the retention guides.

2. Place the hinges down on the lower case and ensure correct positioning of the antenna cables and the LCD cable and replace the two (2) screws.

Step

Screw

Quantity

Screw Type.

LCD Module Assembly

2*5

2

3. Replace the LCD cable connector.

4. Press down the LCD cable connector protective cover.

Was this article helpful?

0 0

Post a comment