Removing the Hard Disk Drive Module

  1. See "Removing the Battery Pack" on page 42.
  2. Loosen the two (2) captive screws on the HDD Cover.
Acer Ferrari Hdd Cover

3. Remove the HDD Cover from the inside edge.

4. Grasp the black tab.

5. Lift up on the black tab to pull the HDD out but do not remove completely. Flip the HDD over to allow access to the HDD cable.

CAUTION: Do not pul the HDD out before disconnecting the HDD cable.

6. Grasp the HDD cable connector tab and pull up.

Aspire 6930 Hard Disk Drive Connector

7. Remove the HDD cable from the HDD.

Acer Ferrari Hard Disk Connector Cable
8. Remove the four (4) screws of the HDD rails.




Screw Type.

HDD Disassembly

3*3.5 (silver)



  1. Remove the rails from the HDD.
  2. Remove the rails from the HDD.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment