LCD Module Disassembly Flowchart

Screw List

Step

Screw

Quantity

Part No.

LCD Bezel Disassembly

2*5

2

86.TG607.004

LCD Panel Disassembly

2*3

4

86.S0207.001

Step

Screw

Quantity

Part No.

LCD Bracket Disassembly

2*2.5

4

86.TPK07.001

  1. See "Removing the LCD Module" on page 69.
  2. Remove the two (2) screw covers.

Step

Screw

Quantity

Screw Type.

Bezel Disassembly

2*5

2

Pry the bezel free at the corner and lift the bezel off the hinge.

Pry the bezel free at the corner and lift the bezel off the hinge.

  1. See "Removing the LCD Bezel" on page 81.
  2. Disconnect the camera board connector

3. Lift the camera board out.

  1. See "Removing the Camera Board" on page 83.
  2. Lift the microphone off the adhesive.

3. Remove the four (4) screws.

Step

Screw

Quantity

Screw Type.

LCD Panel Disassembly

2*3

4

*

  1. See "Removing the LCD Panel" on page 84.
  2. Pick up the panel and remove the four (4) screws holding the brackets in place.

Step

Screw

Quantity

Screw Type.

LCD Panel Brackets Disassembly

2*2.5 (silver)

4

ยป

  1. See "Removing the LCD Panel" on page 84.
  2. Pull the vertical foil strip off the microphone cable.

3. Pull off the horizontal foil strip till the FPC cable is completely exposed.

4. Pull the cable sleeve off the adhesive.

Lift up the clear connector protector.

Lift up the clear connector protector.

  1. See "Removing the LCD Panel" on page 84.
  2. Lift up the four (4) foil tabs on each corner.
3. Pull the wiring free of the retention guides.

Was this article helpful?

0 0

Post a comment