Information

The Information screen displays a summary of your computer hardware information.

I Phoenix SecureCore (tm) Setup Utility l'Information Main|

Security Boot

CPU Type CPU Speed

HDD Model Name: HDD Serial Number: ATAPI Model name: System BIOS Version: VGA BIOS Version: Serial Number: Asset Tag Number: Product Name: Manufacturer Name: UUID:

AMD Athlon(tm) X2 Dual Core Processor L310 1200 MHz

WDC WD3200BEVT-22ZCT0 WD-WX80A7939866

v0.3102

ATi 010.094.001.020.033368 ZH601234567ZH6APJXXWW3

Acer

FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Change Values Select ► SubMenu

Setup Default Save and Exit

NOTE: The system information is subject to different models.

Parameter

Description

CPU Type

This field shows the CPU type and speed of the system.

CPU Speed

This field shows the speed of the CPU.

HDD Model Name

This field shows the model name of HDD installed on primary IDE master.

HDD Serial Number

This field displays the serial number of HDD installed on primary IDE master.

ATAPI Model Name

This field displays the model name of the installed ODD drive.

System BIOS Version

Displays system BIOS version.

VGA BIOS Version

This field displays the VGA firmware version of the system.

Serial Number

This field displays the serial number of this unit.

Asset Tag Number

This field displays the asset tag number of the system.

Product Name

This field shows product name of the system.

Manufacturer Name

This field displays the manufacturer of this system.

UUID Number

Universally Unique Identifier (UUID) is an identifier standard used in software construction, standardized by the Open Software Foundation (OSF) as part of the Distributed Computing Environment (DCE).

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

Phoenix SecureCore (tm) Setup Utility

Phoenix SecureCore (tm) Setup Utility

9110:59]

System Date:

[06/09/2009]

Total Memory:

3072 MB

Video Memory:

336MB]

Quick Boot

[Enabled]

Network Boot

[Enabled]

F12 Boot Menu

[Disabled]

D2D Recovery

[Enabled]

SATA Mode

[AHCI Mode]

Help Exit a

Select Select

Item Menu

Change Values Select ► SubMenu

Setup Default Save and Exit

F 9 F10

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are displayed with 24hour format.

Format: HH:MM:SS (hour:minute:second)

System Date

Sets the system date.

Format MM/DD/YYYY (month/day/year)

Total Memory

This field reports the memory size of the system. Memory size is fixed to 3017 MB.

N/A

Video Memory

Shows the video memory size. VGA Memory size=32 MB

N/A

Quick Boot

Allows startup to skip certain tests while booting, decreasing the time needed to boot the system.

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: Enabled or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled

SATA Mode

Control the mode in which the SATA controller should operate.

Option: AHCI or IDE

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

Information

Main

Phoenix SecureCore (tm) Setup Utility

Security

Supervisor Password Is: Clear User Password Is: Clear

HDD Password Is: Clear

Set User Password [Enter]

Set HDD Password [Enter]

Information

Main

Phoenix SecureCore (tm) Setup Utility

Security

Power on boot:

Boot

Exit

Setup Default Save and Exit

Power on boot:

Setup Default Save and Exit

Boot

Exit

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Supervisor Password Is

Shows the setting of the Supervisor password

Clear or Set

User Password Is

Shows the setting of the user password.

Clear or Set

Set Supervisor Password

Press Enter to set the supervisor password. When set, this password protects the BIOS Setup Utility from unauthorized access. The user can not either enter the Setup menu nor change the value of parameters.

Set User Password

Press Enter to set the user password. When user password is set, this password protects the BIOS Setup Utility from unauthorized access. The user can enter Setup menu only and does not have right to change the value of parameters.

Set Hdd Password

Enter HDD password.

Power on password

Defines whether a password is required or not while the events defined in this group happened. The following sub-options are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Enabled or

Disabled

NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

Was this article helpful?

0 0

Post a comment