Separating the Upper Case from the Lower Case

1.

See

'Removing the

Battery Pack" on page 64.

2.

See

'Removing the

SD dummy card" on page 64.

3.

See

'Removing the

ExpressCard dummy card" on page 65

4.

See

'Removing the

Lower Cover" on page 65.

5.

See

'Removing the

DIMM" on page 66.

6.

See

'Removing the

WLAN Board Modules" on page 67.

7.

See

'Removing the

Hard Disk Drive Module" on page 68.

CO

See

'Removing the

Keyboard" on page 71.

9.

See

'Removing the

Middle Cover" on page 72.

10.

See

'Removing the

LCD Module" on page 74.

  1. Disconnect the touchpad cable from the TPAD1 on the main board.
  2. Disconnect the touchpad cable from the TPAD1 on the main board.

12. Remove the thirteen screws (2 x B, 10 x A, 1 x F) on the bottom and top panel.

Step

Size (Quantity)

Color

Torque

1~2

M2 x L3 (2)

Black

1.6 kgf-cm

3~6

M2.5 L6 (4)

Black

3.0 kgf-cm

7

M2 x L4 (1)

Black

1.6 kgf-cm

8~13

M2.5 L6 (6)

Black

3.0 kgf-cm

  1. Gently remove the upper case from the lower case.
  2. Gently remove the upper case from the lower case.
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment