Removing the LCD Module

  1. See "Removing the Battery Pack" on page 64.
  2. See "Removing the Lower Cover" on page 65.
  3. See "Removing the WLAN Board Modules" on page 67.
  4. See "Removing the Keyboard" on page 71.
  5. Remove the two screws (F) from the left hinge cover and carefully pry loose and remove the left hinge cover.
Acer Ferrari 1100 How Replace

Step

Size (Quantity)

Color

Torque

1~2

M2 x L4 (2)

Black

1.6 kgf-cm

6. Carefully pry loose the latch on the right hinge cover; close the LCD panel and then pull up the right hinge cover to remove.

Battery Notebook 4332 Diagram

8. Remove the large adhesive tape by the battery bay area and carefully pull the wireless antenna cables throught the routing hole.

10. Remove the four screws (A) from the left and right hinge of the LCD module.

Step

Size (Quantity)

Color

Torque

1~4

M2.5 x L6 (4)

Black

4.0 kgf-cm

  1. Carefully remove the LCD module from the base unit.
  2. Carefully remove the LCD module from the base unit.

NOTE: When connecting the cable back to the unit, please note that the cable should be routed well.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • zahra efrem
    How to remove a ferrari hinge?
    8 years ago

Post a comment