Removing the LCD Bezel

  1. See "Removing the Battery Pack" on page 60.
  2. See "Removing the Lower Cover" on page 61.
  3. See "Removing the WLAN Board Modules" on page 63.
  4. See "Removing the Keyboard" on page 67.
  5. See "Removing the Middle Cover" on page 68.
  6. See "Removing the LCD Module" on page 70.
  7. Remove the four screw covers and the two rubber cover.
Lcd Cover Acer Ferrari 1000

8. Remove the six screws (H) on the LCD module as shown.

Step

Size (Quantity)

Color

Torque

1~6

M2 x L4 (6)

Black

1.6 kgf-cm

  1. Carefully pry open the LCD bezel and place the bezel on top of the LCD panel.
  2. Carefully pry open the LCD bezel and place the bezel on top of the LCD panel.
How Open Acer Ferrari 4000

10. Disconnect the microphone cable and remove the bezel from the LCD panel.

Disassembling Acer Ferrari 1000Acer Ferrari One Recovery

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment