Docking the Notebook to the MPB

To dock the Notebook Computer into the MPB, use the following procedure:

  1. Turn the notebook over and open the expansion door (slide the door toward the center of the notebook) to expose the docking connector.
  2. Slide the lever release latch to the front of the MPB to release the docking lever (refer to Figure 2-3).
  3. Swing the Docking Lever outward a full 90 degrees from the side of the MPB.
  4. Slide the notebook into the MPB, right side first, as shown in Figure 2-3. Ensure that the docking guides on both the notebook and the MPB are securely hooked.
  5. Rest the notebook on the MPB. Then press and hold the notebook against the MPB and swing the Docking Latch inward until the Lever Release Latch locks.

®Open the expansion door /n\ Slide release latch on MPB on bottom of notebook V^y forward; swing the docking level outward 90 degrees

Slide notebook into MPB, right side first; ensure docking guides are hooked

Press and hold down notebook and swing the dock lever in until the release latch locks

Slide notebook into MPB, right side first; ensure docking guides are hooked

Press and hold down notebook and swing the dock lever in until the release latch locks

Figure 2-3 Docking the Notebook into the MPB

Was this article helpful?

0 0

Post a comment