Removing Replacing the Display Assembly

Use the following procedure to remove/replace the display assembly:

  1. Remove the battery and AC adapter as described in Paragraph 6.5.1.
  2. Refer to Figure 6-13 and remove the two screws that secure the display cable to the Motherboard assembly. Then unplug display cable J19
Remove Hinge Travelmate 7520
Figure 6-13 Unplugging the Display Cable

3. Remove the four display hinge screws (Figure 6-14) and separate the Display Assembly from the Base Assembly.

Installation is the reverse of Steps 1 through 3.

Remove four screws securing display assembly to the base assembly

Remove four screws securing display assembly to the base assembly

Display Hinge
Figure 6-14 Removing the Display Hinge Screws

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment