Removing Replacing Pcmcia Options

The procedure for removing and replacing the PCMCIA options is as follows:

  1. Turn off the computer and remove the battery pack as described in Paragraph 6.5.1.
  2. Press the upper card eject button to eject the upper card, lower button controls the lower card and use both buttons for Type III devices.
  3. To replace the PCMCIA device, remove any filler cards present and insert the device. Reinstall any external cabling required for the device.

One or two Type I/ II PCMCIA Option Cards or one Type III Option Card

PCMCIA Release Buttons

Figure 6-3 Installing/Removing PCMCIA Options

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment