Touch Pad Failure

Workflow Diagram With Decisions

Internal Speaker Failure

Re-assemble the SPK cable to M/B

Swap M/B

Re-assemble the SPK cable to M/B

Sound Problems

If sound problems are experienced, perform the following actions one at a time to correct the problem.

  1. Reboot the computer.
  2. Navigate to Starts Control Panels System and Maintenance^ System^ Device Manager. Check the Device Manager to determine that:
  • The device is properly installed.
  • There are no red Xs or yellow exclamation marks.
  • There are no device conflicts.
  • No hardware is listed under Other Devices.
  1. Roll back the audio driver to the previous version, if updated recently.
  2. Remove and reinstall the audio driver.
  3. Ensure that all volume controls are set mid range:
  4. Click the volume icon on the taskbar and drag the slider to 50. Ensure that the volume is not muted.
  5. Click Mixer to verify that other audio applications are set to 50 and not muted.
  6. Navigate to Starts Control Panels Hardware and Sounds Sound. Ensure that Speakers are selected as the default audio device (green check mark).

NOTE: If Speakers does not show, right-click on the Playback tab and select Show Disabled Devices (clear by default).

  1. Select Speakers and click Configure to start Speaker Setup. Follow the onscreen prompts to configure the speakers.
  2. Remove and recently installed hardware or software.
  3. Restore system and file settings from a known good date using System Restore.

If the issue is not fixed, repeat the preceding steps and select an earlier time and date.

  1. Reinstall the Operating System.
  2. If the Issue is still not resolved, see "Online Support Information" on page 185.

Internal Microphone Failure

Re-assemble the MIC cable to M/B

Swap M/B

Microphone Problems

If internal or external Microphones do no operate correctly, perform the following actions one at a time to correct the problem.

  1. Check that the microphone is enabled. Navigate to Starts Control Panels Hardware and Sounds Sound and select the Recording tab.
  2. Right-click on the Recording tab and select Show Disabled Devices (clear by default).
  3. The microphone appears on the Recording tab.
  4. Right-click on the microphone and select Enable.
  5. Select the microphone then click Properties. Select the Levels tab.
  6. Increase the volume to the maximum setting and click OK.
  7. Test the microphone hardware:
  8. Select the microphone and click Configure.
  9. Select Set up microphone.
  10. Select the microphone type from the list and click Next.
  11. Follow the onscreen prompts to complete the test.
  12. If the Issue is still not resolved, see "Online Support Information" on page 185.

Re-assemble the MIC cable to M/B

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • Joan High
    Did assembly of touchpad in acer extensa 5220?
    8 years ago
  • alison
    How to increase speaker volume acer extensa 5635?
    8 years ago
  • idris
    How do i increase volume on acer extensa 5235 laptop?
    7 years ago
  • levi
    Where do i find controls of the touchpad sensitivity on acer extensa 5235?
    7 years ago

Post a comment