Removing the Upper Cover

IMPORTANT: The TouchPad is supplied as part of the Upper Cover. If the TouchPad is defective, replace the entire Upper Cover.

  1. See "Removing the LCD Module" on page 57.
  2. Turn the computer over. Remove the eighteen screws on the bottom panel.
Extensa 5635 Clean

Step

Size

Quantity

Screw Type

Upper Cover

M2.5*5

18

*

  1. Turn the computer over and disconnect the following cables from the Mainboard.
  2. Turn the computer over and disconnect the following cables from the Mainboard.

NOTE: Avoid pulling on cables directly to prevent damage to the connectors. NOTE: Use the pull-tabs on FFC cables whenever available to prevent damage.

4. Disconnect A as shown.

5. Disconnect B as shown.

6. Open the locking latch on C and disconnect the FFC from the Mainboard.

Remove the eleven screws securing the Upper Cover to the Lower Cover.

Step

Size

Quantity

Screw Type

Upper Cover

M2.5*4

4

  1. Remove the Upper Cover, right side first as shown.
  2. Remove the Upper Cover, right side first as shown.
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • gaetana pinto
    How to remove acer extensa cover?
    8 years ago
  • cirillo
    How to remove the touchpad wiring from an acer computer?
    6 years ago

Post a comment