Responding to Low Battery Conditions

Battery Reconditioning 4 You

Recondition Battery Guide

Get Instant Access

The computer generally will notify you when you are reaching a low battery condition by the following actions:

  • Four short beeps per minute (unless battery warning is disabled)
  • The battery low warning is automatically disabled when the AC Adapter is installed on the notebook, regardless of the charge condition of the battery pack.
  • If the AC adapter is not plugged in within three minutes of a detected battery low condition, the notebook enters Suspend mode (if low battery suspend is specified in setup). When the notebook enters Suspend mode, it issues one beep, saves contents of RAM to disk and powers down the unit.
  • The Notebook returns to the normal operating mode when the power switch is activated. The unit then recovers RAM information from the hard drive and restores the unit to its previous "On" condition.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment