Replacing the LCD Module

Advance Technical Repair of Laptops Motherboard

Computer Repair Mastery Course

Get Instant Access

1. Place the LCD Module on the Lower Cover.

Aspire 5930g Service Manual

2. Secure the LCD Module using two (2) screws.

■S/

■ ■

/j feO

'3L ÎE5T

— - l*-'

  1. Run the black antenna cable through the cable channel and pull it through the casing as shown.
  2. Run the black antenna cable through the cable channel and pull it through the casing as shown.
4. Run the white antenna cable through the cable channel and pull it through the casing as shown.
Antenna Under Lcd Module

5. Turn the device over and continue running the white antenna cable through the cable channel. Make sure the cable is secured under the cable clips indicated.

How Make Thermal Pads

IMPORTANT: Ensure all heat pads are in place before replacing the Thermal Module.

The following thermal pads are approved for use: • Eapus XR-PE

1. Align the screw holes on the Thermal Module and Mainboard and replace the module.

2. Secure the Thermal Module using three (3) screws.

3. Secure the Mainboard using one (1) screw. 4. Connect the AC cable.

5. Run the LVDS cable along the cable channel as 6. Connect the LVDS cable to the Mainboard. shown.

7. Replace the LVDS adhesive tape.

Nav50 Klavye

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • ben
    How to make Thermal Pads?
    8 years ago

Post a comment