Information

The Information screen displays a summary of your computer hardware information.

Information

Main

InsydeH20 Setup Utility

Security Boot Exit

CPU Type CPU Speed

HDD Model Name: HDD Serial Number:

System BIOS Version: VGA BIOS Version:

Serial Number: Asset Tag Number: Product Name: Manufacturer Name: UUID:

Intel(R) Atom(TM) CPU N270 1.60GHz

ST9250315AS 5VC01WJJ

v0.3103 Intel V1585

2G80SK03B39020741E2500

Acer

E0E4E0A703E2D411866E00238B5A9D20

Change Values Select ► SubMenu

Setup Default Save and Exit

NOTE: The system information is subject to different models.

Parameter

Description

CPU Type

This field shows the CPU type of the system.

CPU Speed

This field shows the speed of the CPU.

HDD Model Name

This field shows the model name of HDD installed on primary IDE master.

HDD Serial Number

This field displays the serial number of HDD installed on primary IDE master.

System BIOS Version

Displays system BIOS version.

VGA BIOS Version

This field displays the VGA firmware version of the system.

Serial Number

This field displays the serial number of this unit.

Asset Tag Number

This field displays the asset tag number of the system.

Product Name

This field shows product name of the system.

Manufacturer Name

This field displays the manufacturer of this system.

UUID Number

Universally Unique Identifier (UUID) is an identifier standard used in software construction, standardized by the Open Software Foundation (OSF) as part of the Distributed Computing Environment (DCE).

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

InsydeH20 Setup Utility

InsydeH20 Setup Utility

10:59]

System Date:

[03/09/2009]

Total Memory:

2048 MB

Video Memory:

[8 MB]

Quick Boot

[Enabled]

Network Boot

[Enabled]

F12 Boot Menu

[Enabled]

D2D Recovery

[Enabled]

SATA Mode

i-1-1

ESC

Help Select Item Exit |9 Select Menu

F5 En

Change Values Setup Default Select ► SubMenu BaM Save and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are displayed with 24hour format.

Format: HH:MM:SS (hour:minute:second)

System Date

Sets the system date.

Format MM/DD/YYYY (month/day/year)

Total Memory

This field reports the memory size of the system. Memory size is fixed to 2048 MB.

N/A

Video Memory

Shows the video memory size. VGA Memory size=8 MB

N/A

Quick Boot

Allows startup to skip certain tests while booting, decreasing the time needed to boot the system.

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: Enabled or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled

SATA Mode

Control the mode in which the SATA controller should operate.

Option: AHCI or IDE

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

InsydeH20 Setup Utility

Information Main Security Boot Exit

Supervisor Password Is: Clear User Password Is: Clear

HDD Password Is: Clear

Set Supervisor Password

Set User Password Set Hdd Password

Power on password

[Disabled]

Item Specific Help

Install or Change the password and the length of password must be less than eight words.

1-1-1

ESC

Help Select Item Exit |9 Select Menu

F5 En

Change Values ^HQ Setup Default Select ► SubMenu Save and Exit

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Supervisor Password Is

Shows the setting of the Supervisor password

Clear or Set

User Password Is

Shows the setting of the User password.

Clear or Set

HDD Password Is

Shows the setting of the HDD password.

Clear or Set

Set Supervisor Password

Press Enter to set the supervisor password. When set, this password protects the BIOS Setup Utility from unauthorized access. The user can not either enter the Setup menu nor change the value of parameters.

Set User Password

Press Enter to set the user password. When user password is set, this password protects the BIOS Setup Utility from unauthorized access. The user can enter Setup menu only and does not have right to change the value of parameters.

Set Hdd Password

Enter HDD password.

Power on password

Defines whether a password is required or not while the events defined in this group happened. The following sub-options are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Enabled or

Disabled

NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • reginard
    How to change hard drive in aspire one ao531h?
    9 years ago
  • terenzio
    How to clear supervisor password acer aspire one ao531h aspire one ao531h?
    8 years ago

Post a comment