Changing a Password

1. Use the t and i keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears.

Set Supervisor Password

Enter Current Password Enter New Password Confirm New Password

  1. Type the current password in the Enter Current Password field and press Enter.
  2. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field.
  3. Press Enter. After setting the password, the computer sets the User Password parameter to "Set".
  4. If desired, you can enable the Password on boot parameter.
  5. When you are done, press F10 to save the changes and exit the BIOS Setup Utility. If the verification is OK, the screen will display as following.

[

Continue

in saved. ]

The password setting is complete after the user presses Enter.

If the current password entered does not match the actual current password, the screen will show you the Setup Warning.

Setup Warning

Inva

Continue

zord. ]

If the new password and confirm new password strings do not match, the screen displays the following message.

Setup Warning

Passwo Re-e

rds do no nter pass

t match. word.

This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay.

InsydeH20 Setup Utility

Rev. 3.5

Information Main Security

2. IDE1

  1. USB FDD :
  2. USB HDD :
  3. Network Boot
  4. USB CDROM

Atheros Boot Agent

Item Specific Help

Use <t > or <t > to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

1-1-1

ESC

Help ^n Select Item Exit |9 Select Menu

F5 En

Change Values ^KQ Setup Default Select ► SubMenu BFM Save and Exit

The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.

InsydeH20 Setup Utility Rev. 3.5

Information

Main

InsydeH20 Setup Utility Rev. 3.5

Item Specific Help

Exit Saving Changes

Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes

Item Specific Help

Exit System Setup and save your changes to CMOS.

Help

Exit

Select Select

Item Menu i/F6 ter

Change Values Select ► SubMenu

Setup Default Save and Exit

The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS.

Exit Discarding Changes

Exit utility without saving setup data to CMOS.

Load Setup Default

Load default values for all SETUP item.

Discard Changes

Load previous values from CMOS for all SETUP items.

Save Changes

Save Setup Data to CMOS.

The BIOS flash memory update is required for the following conditions:

  • New versions of system programs
  • New features or options
  • Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM.

NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility.

NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.

NOTE: Please use the AC adaptor power supply when you run the flashit utility. If the battery pack does not contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not completely loaded.

Follow the steps below to run the Phlash.

  1. Prepare a bootable diskette.
  2. Copy the flash utilities to the bootable diskette.
  3. Then boot the system from the bootable diskette. The flash utility has auto-execution function.

Perform the following steps to use the DOS Flash Utility:

1. Copy the BIOS flash tool and the BIOS file to a USB storage disk. Now use this disk to boot the system.

Insydeh20 Setup Utility Rev

2. Use the DOS command prompt to enter the following command: Flashit bios ver.fd /dc /mc /all

The BIOS flash process begins.

Perform the following steps to use the WinFlash Utility: 1. Copy the BIOS file into the Winflash folder.

Double-click the WinFlash executable file.

3. Click OK to begin the update. A progress screen displays.

Reset Password Bios Acer Aspire 4935

4. When the process is complete, close all programs and applications and reboot the system.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment