Disassembling the Upper Case Assembly

  1. Disconnect the touchpad board to main board FFC and remove it.
  2. Remove the seven screws and disconnect the touchpad to touchpad board FFC.
  1. Detach the touchpad bracket from the upper case.
  2. Remove the touchpad board from the upper case.
  3. Disconnect the touchpad to touchpad board FFC then remove the FFC and the touchpad.
  1. Disconnect the launch board FFC from the launch board and the media board and remove the FFC.
  2. Remove the three screws fastening the media board to the upper case.
  3. Remove the media board from the upper case.
  1. Remove the two screws holding the audio board to the upper case.
  2. Tear off the audio cable from the lower case.
  3. Turn over the audio board as shown.
  1. Disconect the audio board cable from the audio board and remove the cable.
  2. Disconnect the microphone cable and remove the audio board.
  3. Carefully take out the microphone cable and the microphones from the lower case.
  1. Detach and disconnect the launch board cable and remove it.
  2. Detach the launch board insulator as shown.
  1. Remove the four screws fastening the launch board.
  2. Take out the launch board from the upper case.
  3. Then take out the touchpad frame from the upper case.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment