CCD Module Disassembly

  1. Pull out the CAS from the CCD module.
  2. Remove the CCD holder from the CCD module.
  3. Pull out the CAS from the CCD module.
  4. Remove the CCD holder from the CCD module.

3. Open the CCD module as shown.

  1. Remove the two screws securing the CCD board.
  2. Remove the CCD hinge.
  1. Remove the CCD board.
  2. Disconnect the CCD cable from the CCD board.
  1. Remove the four screws securing the 2nd HDD bracket.
  2. Remove the 2nd HDD bracket.
  3. Remove the four screws securing the 2nd HDD bracket.
  4. Remove the 2nd HDD bracket.
  1. Remove the four screws securing the 1st HDD bracket.
  2. Remove the 1st HDD bracket.
  1. Remove the ODD bezel from the ODD module.
  2. Remove the two screws securing ODD bracket.
  3. Remove the ODD bezel from the ODD module.
  4. Remove the two screws securing ODD bracket.

3. Remove the ODD bracket from the ODD module.

Was this article helpful?

0 0

Post a comment