Disassemble Case Touchpad and CDPlayer

  1. Remove the three screws located on the upper case as shown.
  2. Remove those five screws located on the upper case as shown.
  1. Turn the system over and loosen the five screws from the edge of the system.
  2. Remove the seven screws as shown.

5. Disconnect the MIC. cable from here.

6. Tear the tape and disconnect the CD-Player FFC.

  1. Remove the two screws securing the touchpad board support.
  2. Detach it from the system.

9. Disconnect the power board cable from the touchpad board.

  1. Remove the two screws securing the power board.
  2. Detach it from the position.
  1. Remove the two screws as shown.
  2. Be aware of indention positions to unhook the touchpad support.
  3. Detach the touchpad support from the system.
  4. Gently detach the touchpad board from the system.
  5. Remove the two screws as shown.
  6. Be aware of indention positions to unhook the touchpad support.
  7. Detach the touchpad support from the system.
  8. Gently detach the touchpad board from the system.

Was this article helpful?

0 0

Responses

  • matthias scholz
    How to remove cdplayer from aspire 5220?
    9 years ago

Post a comment