Removing the SD Dummy Card

1. Slide the SD Dummy Card out of the slot and remove it from the computer.

  1. See "Removing the Battery Pack" on page 56.
  2. Loosen the seven captive screws in the Lower Door.

3. Remove the Lower Door as shown.

  1. See "Removing the Lower Door" on page 59.
  2. Remove the single screw securing the ODD Module.

Step

Size

Quantity

Screw Type

ODD Module

M2.5*4

1

>

  1. Insert a suitable object in to the Lower Cover to push the ODD Module clear of the casing.
  2. Pull the ODD Module out of the chassis.

5. Remove the two screws securing the ODD Bracket and remove the ODD bracket from the module. NOTE: Remove the left side screw first during disassembly.

Step

Size

Quantity

Screw Type

ODD Bracket

M2*3

2

*

  1. Insert a pin in the eject hole of the ODD to eject the ODD tray.
  2. Insert a pin in the eject hole of the ODD to eject the ODD tray.

7. Press down on the locking catch to release the ODD cover and remove.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment