BIOS Recovery by Crisis Disk BIOS Recovery Boot Block

BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed. The system provides a function hotkey Fn Esc, for enable BIOS Recovery process when system is powered on during BIOS POST. To use this function, it is strongly recommended to have the AC adapter and Battery present. If this function is enabled, the...

Replacing the Graphics Card Heatsink

Acer 5515 Video Card Motherboard

IMPORTANT Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module. The following thermal grease types are approved for use The following thermal pads are approved for use 1. Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2. Apply a small amount of thermal grease to the centre of the CPU there is no need to spread the grease manually, the...

Replacing the TV Tuner Module

Connect the Antenna cable to the TV Tuner as shown. NOTE When reattaching the Antenna, ensure the cable is tucked into the chassis to prevent damage. 3. Insert the single screw to secure the TV Tuner to the Mainboard. 1. Insert the DIMM Module in place. 2. Press down to lock the DIMM module in place. 1. Insert the DIMM Module in place. 2. Press down to lock the DIMM module in place.

Clearing Password Check

How Locate Bios Battery Acer 5920g

Hardware Open Gap Description is as follows If users set a BIOS Password Supervisor Password and or User Password for security reasons, the BIOS will prompt for a password during system POST or when systems enter to BIOS Setup menu. However, if it is necessary to bypass the password check, users need to short the HW Gap to clear the password by performing the following procedure 1. Power off the system, and unplug the AC and Battery from the machine. 2. Open the Hard Drive and RAM doors. 4....