Separating the Upper Case from the Lower Case

1.

See

"Removing the Battery Pack" on page 54.

2.

See

"Removing the SD dummy card" on page 55.

3.

See

"Removing the ExpressCard dummy card

" on page 56.

4.

See

"Removing the Lower Cover" on page 56.

5.

See

"Removing the DIMM" on page 58.

6.

See

"Removing the TV Tuner Board Modules"

on page 58.

7.

See

"Removing the TV Tuner Board Modules"

on page 58.

8.

See

"Removing the Hard Disk Drive Module 1"

on page 64.

9.

See

"Removing the Hard Disk Drive Module 2"

on page 66.

10.

See

"Removing the Hard Disk Drive Module 2" on page 66.

11.

See

"Removing the Middle Cover" on page 73.

12.

See

"Removing the Keyboard" on page 74.

13.

See

"Removing the Heatsink Module" on page 78.

14.

See

"Removing the CPU" on page 80.

15.

See

"Removing the LCD Module" on page 84.

16.

Disconnect the touchpad cable from the TPDA1 connector on the main board

18. Disconnect the E-key cable from EKCN1 on the main board.

20. Disconnect the power cable from DC1 connector on the main board
How Recondition Laptop Batteries

22. Remove the thirteen screws (A) from the bottom panel.

Step

Size (Quantity)

Color

Torque

1~13

M2.5 x L8 (13)

Black

3.0 kgf-cm

Electric Vehicle Inverter

Step

Size (Quantity)

Color

Torque

1~3

M2.5 x L8 (3)

Black

3.0 kgf-cm

24. Gently remove the upper case from the lower case.

CAUTION: Remember to release the power cable from the hole on the upper case before removing the upper case from the system.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment